Mada za sehemu hiiMaking seamsMada 5
- Making open flat seams
- Making open French seams
- Making open double seams
- Making overlapping seams
- Making English seams
Making Overlapping Seams
An overlapping seam is a type of seam where two pieces of material are joined by placing them on top of each other with their right sides facing up, rather than joining them edge-to-edge with right sides together. One piece overlaps the other, and the stitching goes through both layers to hold them together.
This seam is especially useful in leather goods and footwear making because it helps you follow pattern marks accurately and maintain correct measurements throughout your work.
- The right side (outer side) of the fabric or leather faces up during stitching
- One piece of material overlaps the other piece
- Stitching is done through both layers to secure the join
- The raw edges are usually finished or trimmed before or after stitching
- This method allows you to see and follow your pattern marks clearly
Overlapping seams are preferred in leather goods and footwear for several reasons:
- Easier to follow marks – Because the right side faces up, you can see pattern markings, notches, and guidelines clearly
- Maintains accurate measurements – The overlap helps preserve the dimensions specified in the pattern
- Suitable for skived components – Skived (thinned) leather edges can be hidden neatly under the overlap
- Good for curved edges – The overlap allows smooth joining around curves
- Professional finish – When done correctly, overlapping seams look neat on the outside of the product
To make an overlapping seam, you will need:
- Leather or fabric pieces (according to your pattern)
- Scissors or sliding knife for cutting
- Measuring tape and ruler for marking
- Hand needle or sewing machine
- Thread (polyester thread is common for leather)
- Silver pen or chalk for marking
- Workbench and workshop stool
- Dust coat or overalls for protection
Step 1: Prepare Your Materials Cut your leather or fabric pieces according to the pattern, adding seam allowance as required. Make sure your pieces are clean and free from dust.
Step 2: Mark Your Overlap Line Using a silver pen or chalk, mark the overlap line on the wrong side of the top piece or on the right side of the bottom piece. This line shows where the edge of the top piece should sit.
Step 3: Position the Pieces Place the first piece on your workbench with the right side facing up. Lay the second piece on top, also with the right side facing up, so that its edge overlaps the first piece along your marked line.
Step 4: Pin or Tack the Pieces If needed, use temporary adhesive or pins to hold the pieces in place. Make sure the overlap is even and consistent along the entire seam.
Step 5: Stitch the Seam Using a sewing machine or hand needle, stitch along the marked line through both layers of material. Keep your stitches straight and uniform. For leather, use a leather needle and appropriate stitch length.
Step 6: Finish the Raw Edges Trim any excess material from the raw edges if needed. You may apply edge paint, glue, or other finish to protect the edges.
In shoe making, the vamp is the front part of the shoe that covers the toes. When joining vamp pieces together, overlapping seams are commonly used:
- Cut the vamp piece and the toe cap piece according to the pattern
- Apply adhesive to temporarily hold the toe cap onto the underlay of the vamp
- Position both pieces with right sides facing up
- Use the overlapping seam method to stitch the joined pieces of the vamp
- The overlap allows you to follow the pattern marks accurately and maintain proper measurement
This same technique can be used for joining other shoe components like quarters and straps.
- Always check your pattern for specific overlap measurements (usually 5mm to 10mm)
- Practice on scrap material before working on your actual project
- Keep your stitching line straight for a professional finish
- Use the correct needle type for your material (leather needle for leather, regular needle for fabric)
In Tanzania, overlapping seams are commonly used by local shoemakers and leathercraft artisans in cities like Arusha, Moshi, and Dar es Salaam when repairing or making shoes such as formal leather shoes, sandals, and traditional footwear. For example, a small-scale shoe repair shop in Mwanza would use overlapping seams to join new leather pieces when fixing worn-out shoe uppers, helping customers extend the life of their shoes at a lower cost than buying new ones.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select relevant materials
- Interpret different drawings correctly
- Select the right tools and equipment
- Select the correct types of threads and needles to suit the required material
- Cut sample leathers
- Set and adjust the sewing machine
- Select and set stitch length correctly
- Perform different types of seams correctly
- Clean seams thoroughly
- Observe safety
- Clean tools and equipment thoroughly
- Store materials correctly
- Store tools and equipment correctly
Tathmini ya matokeo
A fabric materials stitched with overlapping seam according to the required specifications
Tathmini ya maarifa
Knowledge Evidence: Detailed knowledge of:
Method used: The student should correctly explain how to:
- Set machine seams
- Prepare materials for different seams
- Make seams
- Finish and thread ends
Principles: The student should correctly explain the principles of:
- Setting machine seams
- Preparing materials for different seams
- Making seams
- Finishing and thread ends
Theories: The student should explain:
- The differences between seams and stitches
- Seam allowances
- Use of different seams
- Types of threads, needles, and materials used while seaming
Circumstantial knowledge:
Detailed knowledge of:
- Safety precautions pertaining to sewing operations
- Safe handling of tools and equipment
- First aid
- Waste disposal
Swali
What is an overlapping seam?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado