Mada za sehemu hiiMaking intermediate leather goodsMada 4
- Making wallets
- Making travelling bags
- Making briefcase
- Making jackets
A travelling bag is a sturdy bag designed to carry clothes, toiletries, and personal items during trips. Unlike everyday bags, travelling bags must be strong, spacious, and durable to protect belongings over long journeys. In Tanzania, travelling bags are commonly used by market traders, students travelling home for holidays, and families visiting relatives.
Travelling bags come in several designs depending on their purpose and the materials used.
Hard-frame bags have a rigid structure with internal support, making them ideal for protecting fragile items.
Soft bags are made from flexible leather or fabric and are lighter and easier to fold when stored.
Rolling bags have wheels attached, useful for heavy loads when walking long distances.
The bag described here is a soft travelling bag made of leather or fabric with simple fittings.
Start from the design drawing. Read off the finished size, the number and shape of the panels, where the zipper, lock, pockets and straps go, and which parts need stiffening. List every part before you cut anything.
- Leather: choose firm, strong leather with a sound surface. Common finishes are aniline (dyed, with a natural look), pigmented (coated with colour, hard-wearing and easy to clean, so well suited to travelling bags), and suede or nubuck (a soft, brushed surface that marks easily).
- Fabric lining: choose a strong, tightly woven lining such as cotton drill or polyester coat lining, in a colour that suits the leather. It must not tear when the bag is fully packed.
- Reinforcements: stiff board, leather board or foam is placed under the bottom panel and behind the places where straps and locks are fixed, so that the bag keeps its shape and the fittings do not pull out.
- Accessories and fittings: zippers close the opening; locks and buckles fasten the flap and straps; snap buttons close pockets; rivets strengthen strap joints; edge binding covers raw edges.
- Work out the area of each panel (length × width) and add the areas together.
- Add about one-fifth (20%) more for seam allowances, flaws in the leather and offcuts.
- Leather is often sold by the square foot. One square foot is about 930 cm², so divide the total in cm² by 930.
A careful estimate avoids buying too much leather or running out in the middle of the job.
Before starting, gather the following:
Materials
- Leather or strong fabric for the outer body
- Coat lining (inner fabric)
- Zipper for the main opening
- Edge binding materials
- Upper glue
- Snap buttons
- Locks or buckles
- Reinforcement material (stiff board or leather board)
- Strong thread
- Spray finish and polish
Tools
- Measuring tape
- Cutting patterns (paper templates)
- Silver pen or chalk for marking
- Scissors
- Knife
- Cutting block
- Dividers
- Awl
- Set of hole punches
- Hammer
- Sewing machine
- Workbench
- Spray gun (for spraying the finish)
Step 1: Taking Measurements
Measure the intended dimensions of the bag based on what it will carry. Common travelling bag dimensions are approximately 60 cm long × 30 cm wide × 25 cm deep. Record all measurements clearly.
Step 2: Preparing and Cutting the Pattern
- Draw the bag's panels on paper following the measured dimensions.
- Include seam allowances of about 1.5 cm on all edges.
- Cut out the pattern pieces: two side panels, two end panels, one bottom panel, one top flap, and straps.
- Check the leather for scars, holes and thin places, then lay the patterns on it so that these flaws fall outside the pieces. Hold the patterns down with weights. Do not use pins on leather, because pin holes never close. On the lining fabric, lay the patterns along the straight grain and hold them with pins or weights. Lay the reinforcement patterns on the stiff board in the same way.
- Use a silver pen or chalk to trace around each pattern piece.
- Cut the leather with a sharp knife on the cutting block, the lining fabric with scissors, and the reinforcements with a knife. Cut each reinforcement slightly smaller than its panel so that it stays clear of the seams. In a small workshop the pieces are cut by hand like this; in a factory they are cut by machine, with steel dies on a cutting press.
Step 3: Marking and Punching Holes
- Use dividers to mark a stitch line at an even distance from the edge of each seam, and to step off evenly spaced stitch positions if you will stitch by hand.
- Mark positions for hardware such as snap buttons, lock holes, and strap attachments.
- Use a set of hole punches to create holes at marked positions.
- Rest the leather on the cutting block and strike the punch squarely with the hammer, so that neither the punch nor the workbench is damaged.
Step 4: Assembling the Body
- Glue each reinforcement to the flesh (inner) side of its panel.
- Align the side and end panels to the bottom panel, ensuring the corners meet neatly.
- Spread a thin, even coat of upper glue on both edges of each seam and leave it until it feels dry to the touch.
- Press the glued edges together and tap along the join with the hammer. This glue grips at once, so position the pieces carefully first.
- Stitch the seams on the sewing machine with strong thread and a leather needle. For hand stitching, first pierce the stitch holes with an awl along the marked line.
- On edges that are turned in, fold the edge over along a straight line, glue it down and tap it flat before stitching.
Step 5: Installing the Zipper
- Position the zipper along the top opening of the bag.
- Hold the zipper in place with a thin line of glue or with clips, not pins, ensuring it opens and closes smoothly.
- Stitch the zipper tape to the bag panels using a sewing machine.
- Test the zipper several times before proceeding.
Step 6: Adding the Lining
- Cut the coat lining fabric to match each panel, with the same seam allowance.
- Stitch the lining pieces together to make an inner bag, stitching on any inside pocket first.
- Place the lining inside the bag with its seams facing the leather.
- Fold in the top edge of the lining, hold it along the zipper tape with a thin line of glue, and stitch it down neatly.
Step 7: Attaching Hardware
- Insert snap buttons into pre-punched holes and secure using the punch set and hammer.
- Insert the lock: mark its position from the pattern, cut or punch the slots for its prongs, push the prongs through the leather and a small reinforcing piece behind it, and bend them flat. Fit the matching part on the flap and check that the two halves meet and close. Attach buckles to the straps in the same careful way.
- Secure strap handles by stitching through reinforced holes or using metal rivets.
Step 8: Finishing the Edges
- Apply edge binding material along all exposed seam edges.
- Fold the binding over the edge and stitch it down for a clean finish.
- Trim any excess binding material.
Step 9: Final Inspection
- Check all seams for loose stitches.
- Test all hardware (zipper, buttons, locks) for proper function.
- Ensure the bag holds its shape and is symmetrical.
Step 10: Cleaning, Spraying and Polishing
- Trim loose thread ends, rub off glue marks and wipe the bag with a soft, slightly damp cloth.
- Spray a thin, even coat of leather finish with the spray gun, keeping the gun moving about 20 to 30 cm from the surface. Spray in a well-ventilated place, wearing a mask, and away from any flame.
- Let the finish dry, then polish with a soft cloth or brush until the leather shines evenly.
Step 11: Packing and Storing
- Stuff the bag with clean paper so that it keeps its shape, and wrap the metal fittings so that they do not scratch the leather.
- Put the bag in a cloth or paper cover and then in a box or carton. Do not seal leather in airtight plastic for a long time, because trapped moisture causes mould.
- Store finished bags on shelves in a cool, dry place away from direct sunlight, with nothing heavy on top of them.
Maria's Travelling Bag Project
Maria needs a travelling bag for her belongings when she travels home to Mbeya during school holidays. She measures her clothes and decides on a bag 55 cm long, 28 cm wide, and 22 cm deep.
Before buying leather she estimates the area: two side panels (55 cm × 22 cm each) = 2,420 cm²; two end panels (28 cm × 22 cm each) = 1,232 cm²; one bottom panel (55 cm × 28 cm) = 1,540 cm²; one top flap (55 cm × 28 cm) = 1,540 cm²; two straps (60 cm × 4 cm each) = 480 cm². The total is 7,212 cm². Adding one-fifth for seam allowances and waste gives about 8,650 cm², a little over 9 square feet, so she buys 10 square feet of brown leather. She cuts the panels, adding the seam allowance to each. After stitching the sides and ends to the bottom, she adds a zipper along the top. She lines the inside with blue cotton fabric, attaches two shoulder straps with rivets, and adds a lock to the flap.
The finished bag holds all her clothes securely and survives the bus journey from Dar es Salaam to Mbeya without damage.
- Always add seam allowance when cutting pattern pieces.
- Punch the holes for fittings before fixing them, and pierce stitch holes with an awl before hand stitching.
- Apply glue sparingly to prevent it from seeping through visible seams.
- Test hardware before final installation to ensure proper fit.
- Work systematically from measurement to finished product for best results.
- Cutting panels without checking grain direction of leather or fabric.
- Skipping the lining, which reduces the bag's professional appearance.
- Using weak stitching that cannot hold heavy loads.
- Using pins on leather, which leaves holes that never close.
- Wear a dust coat or overall and closed shoes. Tie back long hair and keep sleeves and fingers away from the needle and moving parts of the sewing machine. Switch the machine off before changing the needle or the bobbin.
- Cut away from your body, keep the hand that holds the leather behind the blade, and cover or put away knives when they are not in use.
- Upper glue and spray finishes give off harmful fumes and catch fire easily. Use them near open windows, keep the lids on, and never use them near a flame.
- For a small cut, wash it with clean water, press on it with a clean cloth until the bleeding stops, cover it with a plaster and report it. If glue or finish gets into the eyes, rinse with plenty of clean water and get medical help.
- Keep large leather and fabric offcuts for small goods such as key holders, and put the rest in the waste bin. Put empty glue tins and glue-soaked rags in the container for hazardous waste; never burn them or pour glue down a drain.
- Wash the spray gun straight after use, brush lint from the sewing machine and cover it, wipe the tools, and return them to their places with knife blades and awl points protected.
A small business owner in Arusha can use these skills to make and sell travelling bags at the local market. By buying leather carefully, cutting with little waste and finishing each bag neatly, she can sell her bags at a fair price and build a steady income from her leatherworking skills.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to correctly:
- Interpret different designs
- Select tools and materials
- Estimate the amount of leather required based on designs
- Select fabric lining
- Lay patterns on leather and trace around them
- Lay patterns on fabric and trace around them
- Lay patterns on reinforcements
- Cut out leather
- Cut out fabrics
- Cut out reinforcements
- Assemble leather pieces using glue
- Stitch the leather product
- Insert lock
- Clean the leather product
- Spray and polish
- Pack into packing materials
- Observe safety
- Store finished leather products
- Clean tools, equipment, and machines
- Store tools and equipment
Tathmini ya matokeo
Travelling bags are made according to their specifications
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to make travelling bag
Principles: The student should explain the principles of:
- Adopting patterns into making leather goods
- Operating tools, equipment, and machines
- Making patterns
- Hand cutting
- Machine cutting
- Folding
- Sewing
Theories: The student should explain correctly:
- Different types of leather work accessories and fittings
- Different types of leather finishes
- Proper use of tools, equipment, and machines
- Different designs and styles of travelling bags
- Uses of different types of accessories and fillings
- The importance of precision and attention to details when making travelling bags
Circumstantial knowledge:
Detailed knowledge of:
- Safety precautions for making leather goods
- Safe handling of work tools, equipment, and machines.
- First aid
- Waste disposal
Swali
In a soft travelling bag, why is a piece of stiff board placed under the bottom panel?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado