Mada za sehemu hiiMaking intermediate footwear projectsMada 4
- Making safari boots
- Making derby shoes
- Making Oxford shoe
- Making training shoes
Derby shoes are a classic style of footwear characterized by open lace facings where the quarters (the back parts of the upper) are stitched on top of the vamp (the front part). Unlike Oxford shoes, which have closed lacing, Derby shoes have a more casual appearance and are versatile enough for formal and casual wear. They are one of the most basic and simple shoe upper constructions, making them an ideal project for learning footwear making.
Before starting to make Derby shoes, you must prepare all necessary tools, equipment and materials.
Tools
- Scissors
- Cutting knives
- Cutting dies
- Cutting board
Equipment
- Cutting machines
- Sewing machines
- Roughing machines
- Folding machines
- Skiving machines
Materials
- Upper leather
- Lining leather
- Fabric
- Glue (adhesive)
- Finishes
- Toe puff material
- Stiffener material
- Insole materials
- Shank
- Shoe laces
- Eyelets
- Reinforcement materials
The process of making Derby shoes involves several important steps. Each step must be done carefully to produce a quality shoe.
1. Cutting
The first step is to cut the leather pieces according to the patterns.
- Trace the patterns on the leather using a silver pen or pencil
- Make sure the patterns are correctly positioned on the leather
- Cut all pieces of leather and lining according to the patterns
- Use sharp cutting knives or scissors for clean cuts
2. Skiving
Skiving is the process of thinning the edges of leather pieces to make them easier to fold, join, and stitch together.
- Skive the flesh side of the leather pieces (the side that was originally facing the animal)
- Skive the edges of the vamp pieces to allow folding
- Skive the underlay and folding area of the quarters
- Skive the folding area of the counters
- Skive the folding margin of the tongues
Skiving ensures that when pieces are joined together, the resulting seam is smooth and not bulky.
3. Assembling the Upper Pieces
This is the main construction phase where all parts of the upper are joined together. Follow these steps in order:
- Join quarter lining and counter lining with adhesive
- Apply adhesive and secure the counter on the quarter
- Join tongue and vamp together
- Stitch quarter lining onto the counter lining
- Stitch the counter on the quarter, then stitch the seam
- Attach reinforcement tape for extra strength
- Attach binding strap leather
- Attach lining and quarter upper together
- Attach the vamp lining with a vamp; stitch the tongue and trim excess materials
- Attach quarters with vamps
- Attach the quarter lining to the vamp lining
- Perform sewing the upper in the sewing machine
- Punch and insert eyelet tabs for the laces
4. Lasting
Lasting is the process of pulling over and fixing the shoe upper onto the shoe last (the form that gives the shoe its shape).
Steps for lasting:
- Attach the insole to the last
- Insert the toe-puff and stiffener into the upper
- Place the upper on the last and begin pulling-over using lasting pincers
- Make the first draft pull at the toe point and secure with a 13mm tack
- Make the second and third drafts to position the front of the shoe
- Make the fourth draft to position the seat
- Make the fifth and sixth drafts to cover the counter
- Make drafts around the toe and seat, twisting the pincers to prevent pleats
- Apply glue between the insole and lasting allowances
- Cement the upper and insole, then remove the shoe tacks
- Hammer all around the feather edge for a smooth finish
Qualities of a well-lasted shoe:
- The upper should be pulled down to the last completely
- The top line should be snappy (firm and neat)
- Toe-cap or other parts should be in the correct position
- The back should be straight with the correct height
- Both shoes should make a proper pair
5. Sole Attachment
After lasting, attach the sole to complete the shoe:
- Rough the lasted margin of the sole
- Apply polyurethane adhesive (PU) to both the sole and the shoe upper bottom
- Activate the adhesive with heat
- Attach the soles and press them firmly
- Remove the shoe from the last
6. Finishing
The final step gives the shoe its final appearance:
- Clean the shoe to remove any excess adhesive or dust
- Apply acceptable finishes to cover any unevenness
- Spray with finishes if necessary for a polished look
A student needs to cut the upper components for a Derby shoe. The pattern shows the following pieces:
- 2 vamps (left and right)
- 2 quarters (left and right)
- 2 counters
- 1 tongue
- Lining pieces for each component
When cutting the leather, the student should:
- Place the pattern pieces on the flesh side of the leather
- Trace around each pattern with a silver pen
- Check that the leather is free from defects in the areas being used
- Cut carefully along the traced lines using a sharp knife
- Ensure all pieces are cut with proper seam allowances
In Tanzania, knowing how to make Derby shoes can lead to small business opportunities in local markets. For example, a young entrepreneur in Arusha could start a shoe repair and custom shoe-making workshop, producing Derby shoes for formal occasions like weddings or school ceremonies. With materials costing around TZS 30,000-50,000 for a basic pair, a skilled maker could sell finished Derby shoes for TZS 80,000-150,000, earning a good profit while serving community needs for quality footwear.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to correctly:
- Interpret different derby shoe designs
- Select tools, equipment, and materials
- Select appropriate lasts
- Estimate the amount of leather required according to designs
- Select materials for the upper
- Select materials for the bottom
- Lay patterns onto leather and trace them
- Lay patterns onto fabric and trace them
- Lay patterns onto reinforcements and trace them
- Cut out leather
- Cut out fabrics
- Cut out reinforcements
- Assemble footwear upper using glue
- Stitch footwear upper using glue
- Assemble the bottom insole
- Tack insole on the last
- Pull the shoe upper on the last
- Apply glue on the shoe bottom
- Apply glue to shoe upper
- Draft the upper using shoe tacks
- Hammer the bottom
- Remove shoe tacks
- Rough shoe bottom
- Prepare sole
- Rough the sole
- Apply glue to the sole
- Apply glue to the insole
- Attach sole
- Press sole
- Crease the edges
- Rough the sole
- Polish and finish the bottom
- Remove last
- Insert soak lining
- Finish and control quality
- Pack into pairs
- Observe workshop safety
- Clean materials
- Clean tools, equipment and machines
- Store materials
- Store tools and equipment
Tathmini ya matokeo
Derby shoes are made according to their design specifications
Tathmini ya maarifa
Knowledge Evidence:
Detailed knowledge of:
Method used: The student should correctly explain how to make derby shoes
Principles: The student should correctly explain the principles of:
- Operating equipment and machines
- Pattern laying
- Footwear drafting
- Derby shoe construction
- Footwear lasting
- Finishing shoe upper using different finishes
- Handling finishes and chemicals
Theories: The student should explain:
- Types of leather work accessories and fittings
- Types of footwear constructions
- Proper use of tools, equipment and machines
- Uses of bottom components
- Types of footwear materials
- Types of leather finishes
- The importance of precision and paying attention to details when making footwear
Circumstantial knowledge:
- Safety precautions for making shoes
- Safe handling of work tools, equipment, and machines
- Waste disposal
Swali
Which part of the Derby shoe is stitched on top of the vamp?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado