Mada za sehemu hiiMaking intermediate footwear projectsMada 4
- Making safari boots
- Making derby shoes
- Making Oxford shoe
- Making training shoes
Making Training Shoes
Training shoes, also known as athletic shoes, are primarily designed for sports, physical exercises, or running. They are different from ordinary dress shoes because they include several special parts such as an Achilles tendon protector, eye stay, mudguard, collar, and rear foot stabiliser. These features make training shoes suitable for active use and physical activities.
Training shoes have specific features that distinguish them from other types of shoes:
- Cushioning: Provides shock absorption on different types of terrain, protecting the feet and joints during physical activity.
- Outsole: Has characteristics that affect grip and durability, ensuring the wearer has good traction.
- Flexibility: Is flexible in the front of the shoe to support total body stability during movement.
- Breathability: Ensures the shoe is lightweight and allows for airflow, keeping the feet cool and dry.
- Foot stability: Is promoted by using a firm counter along with a rear-foot stabiliser.
- Removable insoles: Allows for customisation and comfort, enabling users to replace worn insoles or use custom orthotics.
Tools
Shoe last, awls, pincers, hammer, scissors, glue container, cutting patterns or dies, set of brushes, mask, patterns, sandpaper and silver pen
Equipment
Cutting machine, sewing machine, skiving machine, roughing machine, splitting machine, pressing machine
Materials
- Upper leather
- Lining leather
- Insole materials
- Stiffener materials
- EVA (Ethylene Vinyl Acetate) materials
- Glue (hot glue and upper glue)
- Thread
- Reinforcement materials
- The Achilles tendon protector is soft and reinforced with a soft material, such as a sponge
The most commonly used material for constructing training shoe insoles is Ethylene Vinyl Acetate (EVA). Follow these steps to make the insole:
- Reduce 5 mm from the front side of the trainer insole pattern
- Add 22 mm to the inside
- Add 5 mm to the back along the heel seat
The main principle of running shoes is the Impact Guidance System (IGS), which aims to make all shoe components work together to complement the natural movement of the legs and feet.
1. Tools Preparation
Prepare all tools and equipment and set them ready at the working area. Ensure all machines are functioning properly.
2. Cutting
- Lay a piece of leather on a clean table
- Check the quality and defects on the leather
- Draw and mark the patterns on the leather with a silver pen
- Cut the pieces for the upper and lining components using a cutting knife or scissors
- If using a cutting machine, use cutting dies for precision
3. Skiving
Skive the leather pieces either by hand with a skiving knife or by using a skiving machine. This process thins the leather edges to make folding and joining easier.
4. Preparation and Assembling
- Assemble the pieces using adhesives before sewing
- Apply glue only over the marked area
- Use a brush to apply glue to both surfaces
- Wait until the glue is tacky (about 3 minutes)
- Then stick the two pieces together
5. Stitching
Join uppers and lining by sewing machine. The complete training shoe upper should look smooth and properly joined.
6. Lasting
Follow these steps for lasting:
- Prepare the tools required for the lasting process
- Prepare an insole
- Align the uppers and lining on the last, and insert a smaller gauge nail into the heel at the back of the last to fix the shoe in place
- Last the centre of the toe by pulling the leather from the centre of the toe down below the last with pliers, and hammer a regular gauge nail into the bottom of the last
- Put one nail on each side of the heel, and put one nail on each side of the ball
- Continue placing more nails around the shoe last, removing and re-hammering nails with new pulls when needed, especially around the vamp
7. Roughing
Remove all shoe tacks and mark around the feather edge of the lasted shoe upper to set the margin of roughness for sole attachment. Use a roughing machine or sandpaper.
8. Sole Attachment
- Apply hot glue to the shoe-roughed area, clean the shoe sole with recommended solvent, then apply hot glue
- Leave at least 10 minutes to dry
- Activate the sole and upper using the heating machine
- Attach the sole starting with the front part, then the back part
9. Performing Finishing
- Clean the shoes to remove any excess adhesive and dust
- Apply acceptable finishes to cover any unevenness on the surface
- Spray with acceptable finishes if necessary to make a good finish
In Tanzania, knowledge of making training shoes can help a student start a small shoe repair or custom shoe business. For example, a student in Arusha could make custom training shoes for local football teams using locally available materials like EVA for insoles and leather from Mbeya tanneries, selling each pair for between TSh 80,000 to TSh 150,000 depending on the quality of materials used.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to correctly:
- Interpret different training shoe designs
- Select tools, equipment, and materials
- Select appropriate lasts
- Estimate the amount of leather required according to the design
- Select materials for the upper
- Select materials for the bottom
- Lay patterns onto leather and trace them
- Lay patterns onto fabric and trace them
- Lay patterns onto reinforcements and trace them
- Cut out leather
- Cut out fabrics
- Cut out reinforcements
- Assemble the training shoe upper using glue
- Stitch footwear upper using glue
- Assemble the bottom insole
- Tack insole on the last
- Pull the shoe upper on the last
- Apply glue to the shoe bottom
- Apply glue to shoe the upper
- Draft the upper using shoe tacks
- Hammer the bottom
- Remove the shoe tacks
- Rough shoe bottom
- Prepare sole
- Rough the sole
- Apply glue to the sole
- Apply glue to the insole
- Attach the sole
- Press the sole
- Crease the edges
- Trim the sole
- Polish and finish the bottom
- Remove the last
- Insert the soak lining
- Finish and quality control
- Pack into pairs
- Observe workshop safety
- Clean materials
- Clean tools, equipment and machines
- Store materials
- Store tools and equipment
Tathmini ya matokeo
Training shoe is made as per shoe specifications
Tathmini ya maarifa
Knowledge Evidence: Detailed knowledge of:
Method used: The student should correctly explain how to make training shoes
Principles: The student should correctly explain the principles of:
- Adopting readymade patterns into making training shoes
- Operating equipment and machines
- Laying patterns
- Drafting footwear drafting
- Making training shoes
- Footwear lasting
- Finishing shoe upper using different finishes
- Handling finishes and chemicals
Theories: The student should clearly explain:
- Types of leather work accessories and fittings
- Proper use of tools, equipment, and machines
- Uses of bottom components
- Types of materials used
- Types of leather finishes
- The importance of precision and attention to details when making footwear
Circumstantial knowledge:
Detailed knowledge of:
- Safety precautions pertaining to shoe making
- Safe handling of work tools, equipment, and machines
- Waste disposal
Swali
Which of the following is a special feature of training shoes that provides shock absorption during physical activities?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado