Mada za sehemu hiiMaking intermediate footwear projectsMada 4
- Making safari boots
- Making derby shoes
- Making Oxford shoe
- Making training shoes
Making Oxford Shoes
Oxford shoes are a classic formal footwear style characterised by an enclosed lacing system where the quarters (the back part of the upper) are stitched on top of the vamp (the front part). This construction method gives Oxford shoes their distinctive closed lacing appearance, making them suitable for formal occasions and business wear.
Tools
- Scissors
- Cutting knives
- Cutting dies
- Cutting board
- Awls
- Pincers
- Hammer
- Mallet
Equipment
- Sewing machine
- Roughing machine
- Folding machine
- Skiving machine
- Pressing machine
- Lasting stand
- Shoe lasts
Materials
- Upper leather
- Lining leather
- Fabric
- Glue (adhesives)
- Finishes
- Toe puff material
- Stiffener material
- Insole materials
- Shank
- Shoe laces
- Eyelets
- Reinforcement materials
- Threads
Step 1: Prepare Patterns
Create accurate pattern pieces for all Oxford shoe components. The main patterns needed include:
- Quarter pattern
- Vamp pattern
- Tongue pattern
- Toe cap pattern
- Counter pattern
- Lining patterns for all components
- Insole pattern
Step 2: Cut Materials
- Lay the leather on a clean, flat cutting table
- Check the leather quality for any defects
- Trace patterns onto the leather using a silver pen
- Cut all leather components using cutting knives or scissors
- Cut lining materials using the same patterns
- Cut reinforcement materials (toe puff, stiffener) to size
Step 3: Skive the Pieces
Skiving thins the leather edges to allow smooth folding and joining. Perform skiving on the following areas:
- Folding margin of back strap pieces
- Folding margin of vamp pieces
- Folding margin of toe cap pieces
- Folding margin of quarter pieces
- Folding margin of tongue pieces
- Underlay margins of counter lining and quarter lining
- Underlay margin of quarter and vamp pieces
Step 4: Join Lining Components
- Join quarter lining and counter lining using adhesive
- Apply adhesive to the folding areas
- Fold the pieces and secure with glue
- Attach the counter to the quarter
Step 5: Stitch Lining to Counter
- Stitch the quarter lining and counter lining together
- Stitch the counter piece to a quarter piece
- Apply adhesive and fold the top line of the quarter component
- Stick the quarter onto the quarter lining and stitch
- Trim excess material from quarter lining for a clean finish
Step 6: Attach Tongue to Lining
- Stitch the tongue onto the tongue lining
- Trim excess material from tongue lining
- Do not trim the underlay allowance of the tongue as it will lay over the vamp lining
Step 7: Assemble Quarter and Vamp
- Join inside and outside quarter facings
- Attach reinforcement (throat) and tongue
- Secure all pieces with stitches
- Apply adhesive and attach toe cap onto vamp underlay margin
- Stitch the toe cap component
- Apply adhesive and attach vamp onto quarter underlay margin
- Stitch the vamp and quarter together
- Exclude the quarter lining from this stitching (it will be stitched with vamp lining later)
Step 8: Attach Vamp Lining
- Apply adhesive to vamp lining underlay margin
- Attach under the quarter-tongue-quarter linings
- Stitch the vamp lining in place
Step 9: Punch Eyelet Holes
- Punch shank lace holes
- Insert eyelet tabs into the holes
Step 10: Prepare Upper for Lasting
- Choose the correct shoe last for the size and fitting
- Prepare toe puff and stiffener
- Insert toe puff and stiffener between upper and lining
- Attach insole to the last
- Ensure shank is inserted through the insole
- Align uppers and lining on the last
- Fix the shoe in place with a small gauge nail in the heel
Step 11: Perform Lasting
- Last the centre of the toe by pulling leather down using lasting pincer
- Hammer a nail to hold the leather in place
- Continue around the last, placing nails at regular intervals
- Remove and re-hammer nails with new pulls as needed
- Ensure the upper is smooth without wrinkles or pleats
Step 12: Rough the Sole Margin
- Mark around the feather edge of the lasted shoe upper
- Use roughing machine or sandpaper to rough the margin
- This creates a rough surface for better adhesive bonding
Step 13: Attach the Sole
- Apply polyurethane adhesive (PU) to both the sole and the bottom of the lasted upper
- Activate the adhesive with heat
- Attach the sole to the upper
- Press the sole using the pressing machine
- Allow to set properly
Step 14: Remove Last and Finish
- Remove the shoe from the last
- Clean excess adhesive and dust
- Apply finishes to cover any surface imperfections
- Spray with finishes as needed for a polished look
- Polish the shoe for final appearance
Step 15: Clean and Store Tools
- Clean all tools and equipment after use
- Store tools in their specific places
- Perform preventive maintenance on machines
| Oxford Shoe | Derby Shoe |
|---|---|
| Closed lacing system | Open lacing system |
| Quarter stitched over vamp | Quarter stitched under vamp |
| More formal appearance | More casual appearance |
In Tanzania, skilled shoemakers who master Oxford shoe construction can establish small-scale footwear businesses in local markets such as Mwenge, Kariakoo, or their hometown markets. A trained student could charge between TZS 30,000 to TZS 80,000 for a pair of handcrafted Oxford shoes, depending on the quality of leather used. These skills also enable graduates to work in established leather factories like Tanzania Leather Industry Ltd. in Arusha or seek employment in shoe repair shops in cities like Dar es Salaam, Mwanza, and Dodoma, where quality formal shoes are always in demand for business occasions, weddings, and formal ceremonies.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to correctly:
- Interpret different Oxford shoe designs
- Select tools, equipment and materials
- Select appropriate lasts
- Estimate the amount of leather required based on the design
- Select materials for the upper
- Select materials for the bottom
- Lay patterns onto leather and trace them
- Lay patterns onto fabric and trace them
- Lay patterns onto reinforcements and trace them
- Cut out leather
- Cut out fabrics
- Cut out reinforcements
- Assemble footwear upper using glue
- Stitch footwear upper using glue
- Assemble the bottom insole
- Tack insole on the last
- Pull the shoe upper on the last
- Apply glue to the shoe bottom
- Apply glue to the shoe upper
- Draft the upper using shoe tacks
- Hammer the bottom
- Remove shoe tacks
- Rough shoe bottom
- Prepare sole
- Rough the sole
- Apply glue to the sole
- Apply glue to the insole
- Attach the sole
- Press the sole
- Crease the edges
- Trim the sole
- Rough the sole
- Polish and finish the bottom
- Remove the last
- Insert the soak lining
- Finish and control quality
- Pack into pairs
- Observe workshop safety
- Clean materials
- Clean tools, equipment and machines
- Store materials
- Store tools and equipment
Tathmini ya matokeo
Oxford shoes are made according to their specifications
Tathmini ya maarifa
Knowledge Evidence: Detailed knowledge of:
Method used: The student should correctly explain how to make oxford shoe
Principles: The student should clearly explain the principles of:
- Adopting readymade patterns to make Oxford shoe
- Operating equipment and machines
- Laying pattern
- Drafting footwear
- Making Oxford shoes
- Footwear lasting
- Finishing shoe upper using different finishes
- Handling finishes and chemicals
Theories: The student should correctly explain:
- Types of oxford shoe designs
- Types of leather work accessories and fittings
- Proper use of tools, equipment, and machines
- Uses of bottom components
- Types of footwear materials
- Types of leather finishes used in oxford shoe
- The importance of precision and attention to details when making footwear
Circumstantial knowledge:
Detailed knowledge of:
- Safety precautions pertaining for shoe making
- Safe handling of work tools, equipment, and machines
- Waste disposal
Swali
What type of lacing system does an Oxford shoe have?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado