Mada za sehemu hiiServicing compressor above 60 kWMada 7
Replacing Bearings in Refrigeration Compressors
A bearing is a mechanical component that reduces friction between moving parts, allowing shafts to rotate smoothly. In refrigeration and air conditioning compressors above 60 kW, bearings support the motor shaft and compressor crankshaft, enabling efficient operation. Over time, bearings wear out due to continuous rotation and heat, requiring replacement to prevent compressor failure and system breakdowns.
Compressors typically use two main types of bearings:
-
Ball bearings — These use steel balls to reduce friction and are commonly found in smaller compressors. They handle both radial and axial loads effectively.
-
Roller bearings — These use cylindrical rollers and can carry heavier loads than ball bearings. They are often used in larger industrial compressors above 60 kW.
Before replacing a bearing, gather all necessary tools and safety equipment:
- Working hand gloves
- Electro mechanical toolbox
- Wire brush and revolving wire brush
- Lifting tackles (for heavy components)
- Grease gun
- Compressed air hose with supply
- Dust mask
- Refrigerant leak detector
- Flashlight and inspection lamp
- Pail or containers (for cleaned parts)
Step 1: Safety Preparation
Before starting any work, ensure the compressor is isolated from power supply and the refrigerant has been properly recovered according to environmental regulations. Wear safety gloves and a dust mask to protect yourself from dust and moving parts.
Step 2: Access the Bearing
Use appropriate lifting tackles to safely remove the compressor motor assembly or end cover to access the bearing. Position the unit on a stable workbench or suitable stand.
Step 3: Remove the Old Bearing
Carefully clean the area around the bearing using a wire brush and compressed air to remove dirt and debris. Use a bearing puller tool to safely remove the worn bearing from the shaft. Avoid damaging the shaft surface during removal.
step 4: Inspect the Shaft
After removing the old bearing, inspect the shaft for wear, scratches, or damage. Clean the shaft thoroughly using a wire brush and wipe with a clean cloth. Check for any signs of overheating or corrosion.
Step 5: Prepare the New Bearing
Before installing the new bearing, apply appropriate lubricant (grease) using a grease gun as specified by the manufacturer. Ensure the bearing is clean and free from dust or packaging residue.
Step 6: Install the New Bearing
Press the new bearing onto the shaft using a suitable bearing press tool or appropriate installation method. Ensure the bearing is seated correctly and aligned with the shaft. Apply even pressure to avoid damage.
Step 7: Reassemble and Test
Reassemble the compressor components in the reverse order of disassembly. Use lifting tackles for heavy parts. After reassembly, check for proper alignment and rotate the shaft manually to ensure smooth movement. Use a refrigerant leak detector to check for any leaks at connection points.
Step 8: Final Inspection
Run the compressor briefly under controlled conditions to verify smooth operation. Listen for unusual noises and check for excessive vibration. Monitor pressure and temperature readings to confirm proper performance.
A commercial ice-making plant in Mwanza uses a 75 kW reciprocating compressor. During routine maintenance, the technician noticed unusual vibration and increased operating temperature. Upon inspection, the front main bearing showed signs of wear with visible scoring on the race surface.
The replacement procedure involved:
- Isolating power and recovering refrigerant
- Removing the compressor head and motor assembly using lifting tackles
- Pulling the worn bearing (part number 6205) from the shaft
- Cleaning and inspecting the shaft — no damage found
- Installing a new bearing with fresh grease (20g of freezer-grade grease)
- Reassembling and leak testing — no leaks detected
- Recharging with R-404A refrigerant and testing
The compressor returned to normal operating temperatures (condenser: 40°C, evaporator: -5°C) and vibration levels returned to acceptable limits.
- Always disconnect power before working on compressors
- Recover refrigerant using approved equipment to protect the environment
- Use lifting tackles for heavy components to prevent injuries
- Wear dust mask when cleaning with compressed air
- Keep the work area clean and organized
- Never reuse old bearings — always install new ones
In Tanzania, many hotels, hospitals, and food processing facilities in cities like Dar es Salaam and Arusha rely on large refrigeration systems for cold storage and air conditioning. When a bearing fails in a 60 kW industrial chiller, a trained technician can replace it on-site, saving the cost of importing a new compressor. This skill also creates employment opportunities for young technicians who can service the growing number of cold rooms at fish processing plants along the coast and in inland fishing communities.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
- Select tools and equipment for a task
- Performing diagnostic troubleshooting
- Performing bearing greasing
- Performing pump down
- Replace air filters
- Repair compressors
- Detect leaks
- Performing sheet metal works
- Inspect electrical components
- Carry out plumbing works
- Check/refill oil level
- Store tools and equipment
- Clean equipment and workplace
Tathmini ya matokeo
A record of service works carried out conforms to technical specifications
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to:
- Assemble and disassemble according to procedures
- Apply different leakage detection methods
- Performing diagnostic trouble shooting
Principles: The student should explain the principles of:
- Heat transfer in a heat exchanger
- Compression refrigeration cycle
- Primary and secondary refrigerants
Theories: The student should explain:
- Pressure temperature charts for different refrigerants
- Super heating as it refers to refrigeration
- Application of oil and greasing lubricants
Detailed knowledge about:
- Safe handling of working tools and equipment
- Electric circuitry
- Pressure and temperature quantities with reference to refrigeration
- Safe handling of refrigerants during charging, discharging and storage Environmental regulations on green gases
Swali
What is the primary function of a bearing in a refrigeration compressor?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado