Mada za sehemu hiiPerforming quality control of woven fabricMada 4
- Inspecting woven fabric
- Taking process (weaving) correction measures
- Mending minor faults
- Grading woven fabrics
Correction measures are actions taken to fix defects found in woven fabrics or to prevent defects from occurring during weaving. These measures help avoid extra costs from wasted materials and time loss. When defects are identified early and corrected promptly, the fabric meets quality standards required by customers.
Taking correction measures during weaving is essential because:
- It prevents wastage of yarn and other materials
- It saves time that would be spent reworking or discarding defective fabric
- It ensures the final fabric meets customer requirements
- It reduces financial losses for weavers and textile businesses
The following table shows common defects and how to correct them:
Warp Streaks
These are narrow stripes running along the warp direction. To correct:
- Check yarn for uniform count, composition, and lustre
- Ensure even tension on all warp ends
- Verify uniform dent spacing in the reed
Reedness
These are fine cracks between groups of warp yarns. To correct:
- Adjust warp tension to prevent variations
- Ensure even tension between top and bottom shed lines during beat-up
- Check for proper reed wire spacing
Holes in Fabric
To correct holes:
- Use proper knotting techniques when joining broken yarns
- Ensure yarns are well-lubricated to prevent breakages
- Apply correct tension to warp and weft yarns
Bad Selvages
These are curled or folded edges on the fabric. To correct:
- Ensure smooth and consistent shuttle throwing
- Trim loose yarns at the selvage
- Use proper backstitching or knotting techniques
- Adjust shuttle jaw tension
Thick and Thin Places
These are uneven areas in fabric density. To correct:
- Use high-quality yarn without thick or thin spots
- Adjust loom settings for consistent tension
- Check let-off and take-up motion settings
Misdraw
This occurs when warp yarns are threaded incorrectly through heddles. To correct:
- Use a threading hook to re-thread each warp yarn through the correct heddle
- Check the drawing-in plan before threading
Fluff Contaminations
These are foreign particles mixed in fabric. To correct:
- Clean the spinning and weaving area regularly
- Prevent mixing of dirt particles with yarns
Missing Pick
This is a gap where a weft yarn is missing across the fabric width. To correct:
- Use a needle or small shuttle to manually insert the missing weft yarn
- Start the loom only after clearing broken weft from the shed
Stains in Fabric
To prevent and correct stains:
- Clean dyeing machines after every dye lot
- Protect moving machine parts with safety guards
- Inspect and scour spotty yarns before weaving
The following steps guide the correction of fabric defects during weaving:
-
Identify the defect – Examine the fabric to determine what type of fault is present.
-
Analyse the root cause – Check whether the defect was caused by faulty yarns or incorrect loom settings.
-
Select appropriate tools – Choose the right equipment to correct the defect, such as threading hooks, needles, or scissors.
-
Reset or repair the handloom – Adjust loom settings or repair the equipment to eliminate the cause of the defect.
-
Monitor the process – After making corrections, observe the weaving to confirm the problem has been resolved.
-
Prevent recurrence – Document what caused the defect and advise ways to avoid it in future production.
A weaver notices thick places appearing regularly in the woven fabric. Following the correction process:
Step 1: Identify the defect – Thick places are observed in several sections.
Step 2: Analyse cause – The weaver checks the yarn and finds it contains thick and thin places. The loom tension is also inconsistent.
Step 3: Select tools – The weaver gathers a new cone of even yarn and adjusts the tension device.
Step 4: Reset the loom – The weaver replaces the uneven yarn and sets consistent warp tension.
Step 5: Monitor – The weaver weaves a few centimeters and observes that thick places no longer appear.
Step 6: Prevent recurrence – The weaver decides to check yarn quality before starting each weaving session.
Taking correction measures during weaving involves identifying defects, finding their causes, and applying appropriate fixes. Common defects include warp streaks, reedness, holes, bad selvages, thick and thin places, misdraw, missing picks, and stains. Each defect has specific correction measures that must be followed carefully. By applying these measures, weavers produce quality fabrics that meet market standards.
In Tanzania, a small-scale weaver in Mwanza or Arusha who produces kanga and vitenge for local markets uses correction measures to ensure their products are accepted by customers. For example, if a weaver notices bad selvages on their fabric, they adjust the shuttle tension before continuing, avoiding returns and maintaining their reputation, which directly protects their income from selling woven cloths at local markets.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to: Select tools and equipment
- Observe safety precautions
- Check process parameters during winding, warping, A Process and weaving
- Taking process (weaving) correction measure
- Clean tools and equipment
- Store tools and equipment
Tathmini ya matokeo
The fault in weaving process is properly corrected
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to: take process (weaving) correction measure
Principles: The student should be able to explain the principles of taking process (weaving) correction measure
Theories: The student should explain:
- Major areas of process and quality control in handloom weaving operations
- Stages of quality control
Circumstantial knowledge: Detailed knowledge of:
- Safe handling of working tools and materials
- Safe handling of measuring instruments
Swali
Which of the following is a correct correction measure for warp streaks in woven fabric?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado