Mada za sehemu hiiPerforming pointing and jointingMada 4
Jointing is the process of finishing mortar joints between bricks, blocks, or stones during the construction process, while the masonry work is still in progress. This creates tight, weather-resistant joints that enhance both the appearance and durability of a structure.
Jointing differs from pointing in timing. Pointing is done after the wall is fully built to repair or finish existing joints, whereas jointing is performed as the wall is being constructed. Both processes aim to create durable, weather-resistant, and aesthetically pleasing mortar joints.
Why jointing matters:
- Prevents water penetration and weather damage
- Strengthens the overall structure
- Improves the visual appearance of the wall
- Creates a uniform, professional finish
The textbook describes several joint finishes that can be achieved through jointing:
Flush pointing – Mortar is pressed flush with the brick surface. Simple and economical, but offers less weather resistance as water can accumulate on the flat surface.
Recessed pointing – Mortar is pressed back 5–10 mm from the surface. Creates distinctive shadow lines that highlight individual masonry units. Requires skilled craftsmanship and high-quality mortar.
Struck pointing – Mortar is tooled at a downward angle (30–45°) to create a water-shedding profile. Provides good weather resistance by directing moisture away from the joint.
V-groove pointing – A V-shaped channel (3–5 mm deep) is tooled into the mortar joint. Adds visual depth and architectural character.
Step 1: Prepare the Surface
- Ensure the masonry or blockwork is clean and free of debris
- Slightly dampen the surface with water to improve mortar adhesion
- The moisture prevents the dry masonry from absorbing water from the fresh mortar too quickly
Step 2: Mix the Mortar
- Mix cement and sand in a ratio of 1:3 (1 part cement to 3 parts sand)
- Add water gradually while mixing until the mortar reaches a workable consistency – not too wet, not too dry
- The mortar should hold its shape when pressed but still be pliable enough to work
- Optional: Add waterproofing additives or pigments if required
Step 3: Apply the Mortar
- Load mortar onto a mortar hawk for easy access while working
- Use a trowel to spread mortar evenly on the masonry surface
- Press the mortar firmly into the joints to ensure they are completely filled, eliminating air pockets
Step 4: Shape the Joint
- Use a jointing tool or jointing iron to shape the mortar according to the desired finish
- Common finishes include flush, recessed, V-groove, or concave
- Smooth the surface and remove excess mortar
- Clean the masonry surface with a brush to remove any mortar stains
Step 5: Cure the Joints
- Keep the jointed surface damp for 2–3 days to allow proper curing
- Cover the masonry with a damp cloth or plastic sheet to retain moisture
- Protect the surface from direct sunlight, wind, and rain during curing
Step 6: Clean and Store Tools
- Thoroughly clean all tools after use
- Store them properly in a dry location for future use
A Form 3 student practices jointing on a small section of brick wall in the school workshop. The student uses:
- Cement:sand ratio = 1:3
- Flush joint finish
- Waterproofing additive added to the mortar
Procedure followed:
- Cleaned the brick surface and dampened it with water
- Mixed 1 bucket of cement with 3 buckets of sand, added water gradually
- Pressed mortar into the vertical and horizontal joints using a trowel
- Used a jointing tool to create a smooth, flush finish
- Covered the wall with wet cloth and kept it damp for 3 days
The result: A weather-resistant, neatly finished wall section suitable for the school's storage room renovation.
| Tool | Purpose |
|---|---|
| Trowel | Apply and spread mortar |
| Jointing tool/iron | Shape and finish the mortar |
| Mortar hawk | Hold mortar while working |
| Brush | Clean surface and remove excess mortar |
| Spirit level | Check alignment and evenness |
| Bucket | Mixing water and materials |
| Aspect | Jointing | Pointing |
|---|---|---|
| Timing | Done during construction | Done after wall is built |
| Purpose | Finish joints as work progresses | Repair or renew existing joints |
| When applied | While mortar is still fresh | After mortar has partially set |
In Tanzania, jointing skills are essential for local builders and masonry apprentices working on building projects in towns like Arusha, Dodoma, and Mwanza. For example, a student from Mbeya who learns jointing can use these skills to help construct or renovate houses in their community, or to secure employment as a skilled mason where average daily wages for qualified bricklayers range from TZS 15,000 to TZS 30,000, applying their knowledge to create durable, weather-resistant walls for residential and commercial buildings.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Prepare materials
- Prepare tools and equipment
- Prepare the Mortar
- Clean the Joints
- Dampen the Joints
- Carry out jointing works
- Remove Excess Mortar
- Perform curing
- Clean tools and store
Tathmini ya matokeo
Jointing is performed as per finishing technique to enhance the aesthetic appeal, structural integrity, and weather resistance of the joints between bricks or blocks
Tathmini ya maarifa
Detailed knowledge of:
Method used: The student should explain different methods of jointing
Principles: The student should explain the principles involved in performing jointing
Theories: The student should explain:
- Jointing
- Types of pointing
- Curing
- Cost estimate Circumstantial knowledge Detailed knowledge about:
- Safety precautions to be observed while performing pointing and jointing
- First aid
- Environmental issues
Swali
What is the main difference between jointing and pointing in masonry work?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado