Mada za sehemu hiiConstructing shoresMada 3
- Constructing racking and rider shores
- Constructing flying shore
- Constructing dead shores
Racking and Rider Shores
When constructing or repairing upper floors, walls, or ceilings, builders must often support existing structures temporarily while work is carried out. Shoring is the technique of providing temporary structural support to prevent collapse during construction or renovation. Two common types of shores used in building works are racking shores and rider shores.
Racking and rider shores serve several important purposes in construction:
- Support weakened structures — When a wall or floor is damaged or being replaced, shores bear the load temporarily
- Enable safe repairs — Workers can carry out repairs underneath or beside supported structures without danger of collapse
- Maintain structural stability — During alterations to buildings, shores prevent movement or shifting
- Facilitate inspection — Engineers can safely examine structural elements with temporary support in place
Racking shores are commonly used when lateral (sideways) support is needed, while rider shores provide vertical support from below or overhead support from floor beams above.
Racking Shores
Racking shores, also called needle and raker shores, consist of:
- Needle — A horizontal timber beam that passes through a wall to transfer load
- Raker — A diagonal timber strut that angles from the needle to the ground
- Wall plate — A horizontal timber distributes the load along the wall
- Sole plate — A base plate at the ground that spreads the load
- Bracing — Cross-members that prevent the raker from buckling
Racking shores work by taking the weight of a wall or floor and transferring it diagonally downward to the ground, creating lateral stability.
Rider Shores
Rider shores provide vertical support and include:
- Acrow props — Adjustable steel props that can be raised or lowered to fit
- Strongboys — Steel fitting that hooks over walls or beams
- Rider beams — Horizontal beams that rest on props to support flooring or ceilings
- Timber packs — Wooden pieces used to fill gaps and create firm contact
Rider shores are simpler to install and are commonly used inside buildings where diagonal rakers would obstruct working space.
Step 1: Assessment and Planning
- Examine the structure to determine the load that must be supported
- Identify suitable positions for needles and rakers
- Calculate the required size of timber members based on expected loads
Step 2: Prepare the Site
- Clear the area where shores will be positioned
- Ensure the ground is firm and level for sole plates
- Mark positions for needles, rakers, and wall plates using chalk lines
Step 3: Install Sole Plates
- Place sole plates (typically 225mm × 50mm timber) flat on the ground at the base of each raker
- Ensure sole plates are level and properly anchored
Step 4: Erect the Needle and Wall Plate
- Insert the needle horizontally through the wall at the required height
- Place a wall plate against both sides of the wall to distribute the load
- Secure the needle and wall plate with wedges or clamps
Step 5: Install the Raker
- Position the raker at the correct angle (typically 45° to 60° from horizontal)
- Connect the top of the raker to the needle using a raker plate or lashing
- Rest the bottom of the raker on the sole plate
- Ensure the raker is straight and without bends
Step 6: Add Bracing and Securing
- Install cross-bracing between multiple rakers for stability
- Secure all connections with nails, screws, or bolts
- Check that all joints are tight and firm
Step 7: Final Inspection
- Verify all components are properly positioned
- Use a spirit level to check vertical and horizontal alignment
- Ensure the structure can support the intended load
Scenario: A workshop wall in Arusha needs temporary support while a doorway is widened. The wall is 3.5 metres high and the needle will be positioned at 2.8 metres from ground level. The expected load is 15 kN per shore.
Solution:
-
Calculate raker length — Using the 45° angle principle:
- Vertical height from needle to ground = 2.8m
- For a 45° raker, horizontal distance = vertical height = 2.8m
- Raker length = √(2.8² + 2.8²) ≈ 4.0m
-
Select timber size — For a 15 kN load at 45°, the raker must resist:
- Compression force = Load ÷ sin(45°) = 15 ÷ 0.707 ≈ 21.2 kN
- A 150mm × 50mm softwood raker can safely carry this load
-
Determine needle size — The needle must span the doorway opening:
- If the opening is 1.2m wide, use a 100mm × 75mm timber needle
- This provides adequate strength for the load transfer
-
Identify components needed:
- 1 needle (100mm × 75mm × 1.2m)
- 1 raker (150mm × 50mm × 4.0m)
- 2 wall plates (100mm × 50mm × 0.9m)
- 1 sole plate (225mm × 50mm × 0.6m)
- Nails, wedges, and bracing materials
- Always wear hard helmets, safety boots, gloves, and safety goggles when constructing shores
- Inspect all timber before use — reject any timber that is cracked, split, or damaged
- Ensure sole plates are on solid ground to prevent sinking
- Never overload shores beyond their designed capacity
- Check all connections and bracing are secure before leaving the work area
- Use high-visibility vests when working near other workers or traffic areas
- Keep the work area clean and free of debris to prevent tripping hazards
In Tanzania, bricklayers and masonry workers frequently use racking and rider shores when renovating old buildings in cities like Dar es Salaam and Dodoma. For example, when a shop owner on Samora Avenue wants to widen a doorway to display more goods, a mason would install racking shores to support the wall above before cutting the new opening — without these shores, the wall could collapse and injure workers or damage the shop's inventory worth millions of Tanzanian shillings.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Interpret working drawings for shoring construction
- Prepare shoring members to specifications
- Set out shoring accurately at designated locations
- Install shoring members securely
- Reinforce shoring for added stability
- Dismantle shoring safely after use
- Clean the work area postconstruction.
- Store tools properly for future use
Tathmini ya matokeo
Racking and rider shores constructed and securely in compliance with design specifications, safety standards, and construction regulations
Tathmini ya maarifa
Detailed knowledge of:
Method used: The students should explain the procedures for constructing racking and rider shores to support structures during construction.
Principles: The student should explain the principles involved in constructing racking and rider shores.
Theories: The students should explain:
- The role of racking and rider shores in preventing structural failure during construction.
- The impact of soil conditions and environmental factors on shoring effectiveness. Circumstantial Knowledge: Knowledge about:
- Materials and tools required for constructing effective shores.
- Safety measures to mitigate risks associated with working at heights and heavy loads.
Swali
What is the primary purpose of using shoring during construction or renovation work?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado