Mada za sehemu hiiConstructing shoresMada 3
- Constructing racking and rider shores
- Constructing flying shore
- Constructing dead shores
A flying shore is a temporary timber structure used to support walls, floors, or other structural elements during construction, renovation, or repair work. It safely transfers loads from the structure being supported to the ground, allowing workers to carry out tasks below or beside the supported element without risk of collapse.
Flying shores are essential in the following situations:
- Supporting walls while foundations or lower floors are being constructed
- Temporarily holding up floors or ceilings during repairs
- Creating working space beneath a supported structure
- Providing stability to walls that have been weakened by alterations or damage
The main materials and components used in constructing flying shores include:
- Wall plates: Horizontal timber beams fixed to the wall to distribute load
- Rakers: Inclined timber members that transfer loads from the wall plate to the ground
- Needles: Horizontal timber beams that pass through walls or openings to provide support
- Sole plates: Horizontal bases at ground level that bear the load from rakers
- Cleats: Small timber pieces used to secure joints and connections
- Bracing: Diagonal members that add stability to the shore structure
- Nails, screws, and fasteners: For joining timber members together
-
Assess the load: Determine the weight the flying shore must support, including the structure's own weight, construction materials, and workers.
-
Select appropriate timber: Choose sound timber beams and planks of sufficient size and strength for the expected load.
-
Install wall plates: Attach horizontal timber plates to the wall at the required height using appropriate fixings. Ensure they are level and securely anchored.
-
Position needles: If required, insert horizontal needles through wall openings to provide intermediate support points.
-
Install rakers: Position inclined timber members (rakers) from the wall plate down to the sole plate at ground level. The angle of inclination should typically be between 45° and 60° for optimal load transfer.
-
Place sole plates: Position horizontal base plates on firm, level ground beneath the rakers. The sole plate must rest on solid ground or adequate foundation.
-
Add bracing: Install diagonal bracing between rakers and other members to prevent swaying and increase rigidity.
-
Secure all connections: Fix cleats at all joint locations and ensure all nails, screws, and fasteners are properly tightened.
-
Check alignment: Use a spirit level and plumb bob to verify that all members are correctly positioned vertically and horizontally.
- Always wear appropriate personal protective equipment (PPE): hard hat, safety boots, gloves, high-visibility vest, and safety goggles
- Ensure the ground beneath sole plates is firm and stable
- Check all timber for defects before use
- Inspect the completed shore regularly during use
- Do not overload the flying shore beyond its designed capacity
A contractor needs to support a wall while constructing a new door opening. The wall is 3 metres high and the flying shore will be placed 1 metre from the wall. Calculate the approximate length of raker needed if it is positioned at a 60° angle to the horizontal.
Solution:
Using the right triangle relationship: Raker length=sin(60°)vertical height
Raker length=0.8663 m≈3.46 m
The horizontal distance from wall to sole plate is 1 metre, and the raker would extend approximately: Horizontal extension=tan(60°)1=1.7321≈0.58 m
Therefore, a raker of approximately 3.5 metres in length would be required, with the sole plate positioned about 1.6 metres from the wall horizontally.
In Tanzania, flying shores are commonly used during the construction of commercial buildings in cities like Dar es Salaam and Arusha, where contractors often need to create large openings in existing walls for doors, windows, or shop fronts. For example, a small-scale contractor in Mwanza might use timber flying shores to support the upper wall while constructing a new garage opening, allowing safe work below while the structure remains stable — a practice that ensures worker safety and protects the building from collapse during renovation work.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Understand the purpose of flying shores.
- Interpret working drawings for construction.
- Measure and cut materials accurately.
- Assemble and install flying shores for support.
- Reinforce for stability and safety.
- Safely dismantle after use.
- Clean the work area and store tools properly
Tathmini ya matokeo
Flying shore constructed and securely as per design specifications, and safety standards.
Tathmini ya maarifa
Detailed knowledge of:
Method used: The students should explain the procedures for constructing flying shores to support walls or structures temporarily.
Principles: The student should explain the principles involved in constructing flying shore
Theories: The students should explain:
- The role of flying shores in preventing structural collapse during construction or renovation.
- The effects of environmental conditions on the performance of flying shores. Circumstantial Knowledge: Knowledge about:
- Selection of materials suitable for constructing flying shores
- Safety practices to prevent accidents during the installation and use of flying shores
Swali
What is the primary purpose of a flying shore in construction?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado