Mada za sehemu hiiConstructing timber stairsMada 3
- Constructing straight flight stair
- Constructing quarter turn stair
- Constructing half turn stair
A straight flight stair is a series of steps arranged in a single, straight line connecting two floors or levels. In carpentry, constructing a straight flight stair involves accurately measuring, cutting, and assembling the structural components—treads, risers, and stringers—to create a safe and functional staircase.
Before starting construction, you must understand the main parts:
- Riser – The vertical board that connects one step to the next
- Tread – The horizontal board you step on
- Stringer – The inclined timber that supports the treads and risers; also called a "horse"
- Newel post – The vertical post at the top or bottom of the stair that provides support
- Handrail – The horizontal or sloping rail for holding while climbing
Before cutting timber, you must calculate the rise and run:
- Total rise – The vertical height from the finished floor of the lower level to the finished floor of the upper level
- Total run – The horizontal distance the stair will occupy
- Number of risers – Divide total rise by a convenient rise per step (typically 150mm to 190mm for comfortable stairs)
- Number of treads – Always one less than the number of risers
- Going (tread width) – The horizontal depth of each tread (typically 250mm to 300mm)
Worked Example:
A classroom in Arusha needs a straight flight stair to connect floors 2.4 metres apart. Using a rise of 200mm per step:
- Number of risers = 2,400mm ÷ 200mm = 12 risers
- Number of treads = 12 − 1 = 11 treads
- Total run = 11 treads × 280mm (going) = 3,080mm
Therefore, the stair will have 12 risers, 11 treads, and will require approximately 3.1 metres of horizontal space.
Before beginning construction, gather all required tools:
- Tape measure and spirit level for accurate measurements
- Try square for marking right angles
- Hand saw for cutting timber
- Bench planes for smoothing surfaces
- Chisels for precise joinery work
- Claw hammer and mallet for driving and fitting components
- Cramps for holding pieces firmly during assembly
- Drill or brace for boring holes for nails or screws
Always wear safety gear: overalls, safety boots, helmet, and safety goggles when cutting timber.
Step 1: Take Accurate Measurements
Measure the total rise from floor to floor using a tape measure. Record the exact height. Determine the number of risers by deciding on a comfortable rise per step (around 180mm–200mm works well for most users).
Step 2: Calculate Dimensions
Calculate the number of risers and treads, the going (tread depth), and the total run. Mark these dimensions on a measurement sheet before cutting.
Step 3: Mark and Cut the Stringers
The stringer is the most critical structural member. Using a try square and carpenter's pencil, mark the shape of each step (riser and tread) along the edge of a 225mm × 50mm structural timber. The marks must be accurate and square. Cut along the marked lines with a hand saw, taking care not to overcut the internal corners.
Step 4: Cut Risers and Treads
Cut the riser boards to the calculated width plus a small allowance for fitting. Cut the tread boards to the correct length, ensuring they will sit flush on the stringer. Use a bench plane to smooth all cut edges.
Step 5: Assemble the Flight
Lay the stringers in position and check they are level using a spirit level. Secure the risers to the stringers first, using nails or screws driven through the riser into the stringer. Then place the treads on top, ensuring each tread sits level and projects slightly beyond the riser below. Secure treads with nails or screws driven at an angle through the tread into the stringer.
Step 6: Check Alignment and Stability
After assembly, verify that all steps are uniform in height and depth. Use a spirit level to confirm the flight is not tilting. Check that all joints are tight and secure. Any movement or squeaking indicates loose joints that must be fixed.
Step 7: Finishing
Smooth all surfaces with a plane or sandpaper. Apply wood preservative or paint as required to protect the timber from moisture and insects.
- Always wear safety boots and a helmet when handling timber and using saws
- Secure the ladder firmly before climbing to take measurements or install the stair
- Keep fingers away from the saw blade and chisel edges
- Work in pairs when lifting heavy components
- Clear the workspace of offcuts and debris to prevent trips and falls
In Tanzania, carpenters use these skills when building domestic houses in towns like Dodoma and Mwanza, where multi-storey buildings require stairs between levels. A local carpenter might be contracted to construct a straight flight stair for a new shop in Morogoro, measuring the floor-to-floor height, calculating the rise and run, cutting the stringers from local pine timber, and assembling the treads and risers before fixing the stair in position. This practical skill enables carpenters to earn income by providing essential access solutions in both residential and commercial construction projects.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Interpret working drawings
- Calculate materials required
- Select tools and equipment
- Set height to the first floor
- Calculate total rise and total going
- Prepare string handrail and balustrades
- Fixing rises and goings
- Apply finishes
- Clean work place
- Store tools to safe place
Tathmini ya matokeo
Straight flight stair conforms to technical specifications
Tathmini ya maarifa
Detailed knowledge of:
Method used: The students should be able to identify tools to be used and state procedures of constructing straight flight stair
Principles: The student should be able to describe riser and tread ratio
Theories: The students should be able to explain important aspects to consider when constructing straight flight stair
Circumstantial knowledge: Workshop safety
Swali
Which component of a straight flight stair is described as the vertical board connecting one step to the next?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado