Mada za sehemu hiiConstructing formworkMada 3
- Constructing cast in-situ and pre-cast formworks
- Constructing column formwork
- Constructing beam formwork
Constructing Beam Formwork
Beam formwork refers to the temporary structures and systems used to create and support the mould for a concrete beam until the concrete sets and gains sufficient strength. Essentially, it is the framework that shapes and holds the concrete in place while it cures. Beam formwork must be designed and constructed carefully to ensure safety and accuracy. It has to support the weight of the wet concrete and the forces involved during the curing process, and it must be removed without damaging the cured beam.
Beam formwork plays a crucial role in the construction process for the following reasons:
-
Provides shape and structure — Beam formwork ensures that the concrete takes the desired shape and dimensions of the beam. Without it, the concrete would lack proper form and structural integrity.
-
Provides structural support — Formwork supports the concrete until it gains enough strength to support itself. It helps to maintain the alignment and load-bearing capacity of the beam, which is essential for the overall stability of the structure.
-
Provides accurate dimensions — Properly constructed formwork allows for precise construction of beams to meet design specifications. This precision is critical for ensuring that the beams fit correctly with other structural elements.
-
Provides safety — Well-designed and properly installed formwork systems help to prevent accidents related to collapsing forms or shifting concrete, protecting workers and securing the integrity of the structure.
-
Provides good quality finish — The quality of the final surface of the concrete beam depends on the formwork. Smooth and well-maintained formwork results in a better finish, which is important for aesthetic and functional purposes.
-
Supports reinforcement — Formwork provides a stable platform to position and secure reinforcement bars or mesh within the concrete. This reinforcement is critical for the beam's strength and load-bearing capacity.
Before constructing beam formwork, gather the following:
Materials:
- Timber or marine boards
- Releasing agent
- Props
- Wire nails or screws
- Form ties and spacers
- Shims or wedges
Tools:
- Tape measure
- Pencil
- Hand saw or portable saw
- Claw hammer
- Spirit level
- Building square (try square)
- Ladder
- Chisels
- Safety gear (gloves, goggles, helmet, safety boots, overall)
Follow these steps in order:
Step 1: Identify Materials and Tools
Select appropriate materials and tools based on the beam dimensions specified in the structural drawings. Ensure all tools are in good working condition.
Step 2: Plan and Design
Study the architectural and structural drawings to understand the beam dimensions and reinforcement details. Determine the type of formwork needed based on the beam size and project requirements.
Step 3: Prepare Materials and Tools
Collect all necessary formwork components. Check that all formwork panels and support materials are in good condition and free from defects. Ensure the ground or support area is level and stable.
Step 4: Set Out the Formwork
- Construct the formwork panels according to beam dimensions
- Fix the assembled formwork panel ensuring that it is aligned properly with the beam layout
- Use a tape measure and try square to verify measurements
Step 5: Secure the Formwork
- Install form ties to hold the panels together and maintain the correct beam width
- Install these form ties at regular intervals and ensure they are securely fastened
- Insert spacers between the formwork and the reinforcement to maintain proper cover and position of the rebar
Step 6: Check Alignment
- Use a spirit level, plumb bob and string (manila line) to verify that the beam formwork is plumb and aligned correctly
- Adjust as necessary to ensure the formwork is level and true
Step 7: Apply Release Agent
Apply a releasing agent to the inner surfaces of the formwork before pouring concrete. This helps to prevent the concrete from sticking to the formwork and facilitates easier removal after curing.
A construction crew needs to construct formwork for a simply supported rectangular beam with the following specifications:
- Length: 4 meters
- Width: 300 mm
- Depth: 450 mm
Procedure:
- Measure and cut the side panels (sheathing) to 4 meters in length and 450 mm in height
- Cut the end panels to 300 mm width and 450 mm height
- Fix the side panels to the supporting joists using nails
- Install horizontal braces (wales) at intervals of approximately 1 meter
- Position props (shoring) at 1.2-meter centers to support the formwork
- Check that the formwork is level using a spirit level
- Apply releasing agent to all inner surfaces
- Verify alignment and make necessary adjustments
- Always wear appropriate Personal Protective Equipment (PPE) including helmets, safety boots, gloves, and safety goggles
- Ensure that all formworks and supports are securely installed before pouring concrete
- Follow proper lifting and handling techniques to avoid injury
- Check the stability of the formwork regularly
- Use a ladder safely when working at height
In Tanzania, beam formwork is used in constructing buildings such as schools, markets, and residential houses in areas like Mwanza, Arusha, and Dodoma. For example, when building a two-story house in a growing neighborhood like Kigamboni in Dar es Salaam, carpenters use beam formwork to shape the concrete beams that support the upper floor slab. This skill enables local craftsmen to find employment with construction companies or start their own formwork contracting businesses, earning income to support their families.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Draw a beam formwork
- Interpret the drawings
- Calculate materials required
- Erect props for beam formwork
- Fix beam formwork
- Level and reinforce form work
- Dismantle the form work
- Clean tools and work place
- Store tools to a safe place
Tathmini ya matokeo
Beam formworks constructed as per the drawing and technical specifications
Tathmini ya maarifa
Detailed knowledge of:
Method used: The student should be able to explain methods related to constructing beam formwork
Principles: The student should explain principles for constructing beam formwork
Theories: The students should explain theories related to constructing beam formwork
Circumstantial knowledge: The students should explain detailed knowledge related to constructing beam formwork
Swali
What is the main purpose of beam formwork in construction?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado