Mada za sehemu hiiConstructing shutteringMada 3
- Constructing balcony shuttering
- Constructing upper floor shuttering
- Constructing stair shuttering
A balcony shuttering is a temporary mould that holds wet concrete in shape while constructing a concrete balcony until the concrete hardens and can support itself. This study note explains how to construct balcony shuttering safely and correctly, following the steps used in actual building construction in Tanzania.
A balcony is an elevated outdoor platform that extends from the exterior wall of a building. It is enclosed by a wall, railing, or balustrade for safety and is accessible through an upper floor window or door. Balconies provide outdoor space for relaxation, fresh air, and views of the surrounding area.
In concrete construction, balconies are classified into two main types:
- Projecting balcony — extends outward from the main structure as a cantilevered platform
- Inset balcony — recessed into the main building envelope, often enclosed with glazing or sliding doors
Both types require shuttering to form the slab, edges, and any decorative elements according to the structural design.
Balcony shuttering consists of several structural and supporting elements that work together to hold wet concrete in place. The main components are:
- Props — vertical supports that carry the weight of the formwork and wet concrete
- Sole plate — a horizontal base placed under props to distribute load onto the ground or floor
- Wedges — wooden pieces used to adjust and tighten the height of props
- Struts — diagonal members that prevent lateral movement of the formwork
- Tree head — a horizontal beam that sits on top of props and supports the formwork above
- Plywood sheet — the actual mould surface that contacts the concrete
The following steps describe how to construct shuttering for a balcony measuring 200 cm wide by 400 cm long, supported by beams.
Step 1: Review the Structural Drawings
Before starting, check the structural drawings to confirm:
- Slab thickness (typically 100–150 mm)
- Beam size (for example, 230 mm × 450 mm)
- Balcony dimensions (200 cm × 400 cm)
- Position of the beam at the free (unsupported) edge
Step 2: Set Out and Mark the Balcony Outline
Using a measuring tape, pencil, and string line, mark the balcony outline on the existing wall. Indicate the beam position at the unsupported edge based on the drawing.
Step 3: Construct Beam Shuttering
- Install vertical props at 500 mm intervals beneath the beam location
- Place plywood soffits (bottom forms) for the beam and level them accurately using a spirit level
- Attach side formwork panels and check their position and alignment before fixing them
- Secure all components with nails or screws
- Fix diagonal struts to prevent lateral movement of the formwork
Step 4: Install Slab Shuttering
- Lay stringer timbers of 50 mm × 100 mm spaced at 500 mm over a grid of vertical props set at 0.5 m × 0.5 m intervals
- Fix timber joists (50 mm × 50 mm) at 300 mm spacing on top of the stringers
- Place plywood sheathing over the joists and secure it tightly using nails and screws, ensuring all joints are tightly sealed to prevent concrete leakage
- Fix vertical slab edge formwork with a slope of 1–2% to allow for water drainage
Step 5: Inspect the Shuttering
Before concreting, carry out the following checks:
- Check that all props are firmly secured on the ground or floor
- Verify the level and alignment of both the slab and beam formwork using a spirit level
- Inspect all joints and seals for gaps that could cause concrete leakage
- Ensure proper bracing to prevent formwork collapse during concreting
- Confirm the formwork is clean and free from debris
Problem: Construct shuttering for a balcony that is 200 cm wide and 400 cm long, supported by a beam at the free edge. The slab thickness is 120 mm and the beam size is 230 mm × 450 mm. Calculate the spacing of props and describe the construction procedure.
Solution:
Given:
- Balcony dimensions: 200 cm × 400 cm
- Slab thickness: 120 mm
- Beam size: 230 mm × 450 mm
- Prop spacing for beam: 500 mm intervals
- Prop grid for slab: 0.5 m × 0.5 m
- Joist spacing: 300 mm
Step 1: Calculate the number of props under the beam
Length of beam = 400 cm = 4.0 m
If props are placed at 500 mm = 0.5 m intervals:
Number of props=0.54.0+1=8+1=9 props
Step 2: Calculate the number of stringers for the slab
Width of slab = 200 cm = 2.0 m
Stringer spacing = 500 mm = 0.5 m
Number of stringers=0.52.0+1=4+1=5 stringers
Step 3: Calculate joists required
Length of slab = 400 cm = 4.0 m
Joist spacing = 300 mm = 0.3 m
Number of joists=0.34.0+1≈13+1=14 joists
Construction procedure:
- Mark the balcony outline on the wall and indicate beam position
- Install 9 vertical props under the beam at 500 mm spacing
- Place plywood soffits for the beam and level with spirit level
- Attach side formwork and secure with diagonal struts
- Lay 5 stringers across the prop grid at 500 mm spacing
- Fix 14 joists on top of stringers at 300 mm spacing
- Place plywood sheathing and seal all joints
- Fix edge formwork with 1–2% slope for drainage
- Inspect all components before concreting
When constructing balcony shuttering, always observe the following safety measures:
- Wear a safety helmet, safety boots, leather gloves, safety goggles, and safety masks
- Use a ladder or scaffolding properly when working at height
- Ensure props are on firm ground or sole plates to prevent sinking
- Check all joints and connections are tight before concreting
- Never work under unsecured formwork
- Keep the working area clean and free from tripping hazards
In Tanzania, construction of balconies is common in modern apartment buildings in cities like Dar es Salaam and Arusha, as well as in private housing projects. A carpenter or artisan with skills in balcony shuttering can earn income by constructing formwork for concrete balconies on building sites. For example, a skilled worker might charge approximately TZS 150,000–250,000 to construct shuttering for a 2m × 4m balcony, depending on the complexity of the design and local material costs.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Draw balcony shuttering
- Interpret the drawings
- Calculate materials required
- Erect props for shuttering
- Fix shuttering
- Level and reinforce form work
- Dismantle the shuttering
- Clean tools and work place
- Store tools to a safe place
Tathmini ya matokeo
Constructed balcony shuttering conforms to drawing and technical specifications
Tathmini ya maarifa
Detailed knowledge of:
Method used: The student should explain methods related to constructing balcony shuttering
Principles: The student should explain principles related to constructing balcony shuttering
Theories: The students should explain theories related to constructing column formwork
Circumstantial knowledge: The students should explain detailed knowledge related to constructing balcony shuttering
Swali
Which of the following is the primary function of balcony shuttering?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado