Mada za sehemu hiiConstructing centeringMada 3
- Constructing semi-circular centre
- Constructing segmental centre
- Constructing elliptical centre
Constructing Elliptical Centre
An elliptical centre is a temporary timber formwork used to support the construction of elliptical arches during building work. It has a curved shape that follows an ellipse (an oval), rather than a perfect semicircle. This type of centering is commonly used for arches in bridges, doorways, and decorative architectural features where a flatter, more elegant curve is desired.
An elliptical centre is the temporary support structure that gives shape to an elliptical arch until the masonry or concrete becomes strong enough to support itself. Unlike semi-circular arches (which form a perfect half-circle) or segmental arches (which form part of a circle), elliptical arches create a smoother, more gradual curve that begins low at the sides and rises gently to the highest point.
Elliptical arches are popular in Tanzanian construction because they:
- Provide a more graceful appearance than semicircular arches
- Allow for longer spans while maintaining a lower rise
- Are commonly used in bridges, large doorways, and public buildings
Like other types of centering, an elliptical centre consists of several important components:
- Ribs: The curved timber members that form the actual elliptical shape. They are cut to match the intrados (inner curve) of the arch.
- Lagging: Small timber pieces fixed across the ribs to support the masonry units (voussoirs) above.
- Ties: Horizontal members placed across the bottom to prevent the centre from spreading outward under the weight of the masonry.
- Props: Vertical supports that hold the centre at the correct height.
- Struts and braces: Additional members that provide stability and prevent wobbling.
- Wedges: Wooden wedges placed between props and bearers to allow for minor height adjustments.
Before constructing an elliptical centre, you must understand the basic geometry of an ellipse. An ellipse has two axes:
- Major axis (2a): The longest diameter of the ellipse, running through the centre.
- Minor axis (2b): The shortest diameter, perpendicular to the major axis at the centre.
For construction, we work with:
- Span (S): The horizontal distance between the two supports (the width of the arch opening). This equals the major axis.
- Rise (h): The vertical height from the springing line to the highest point of the arch. This equals half the minor axis (b).
The relationship is expressed as: h=b
And the span relates to the major axis: S=2a
To construct an elliptical centre, you first need to determine the ellipse dimensions from the arch specifications:
Given:
- Span (S) = width of the opening
- Rise (h) = height of the arch
Example Calculation: Suppose you need to construct an elliptical arch with:
- Span (S) = 1.8 metres
- Rise (h) = 0.6 metres
Since the rise (h) equals half the minor axis (b): b=h=0.6 m
The major axis (2a) can be calculated using the ellipse formula. For construction purposes, a common approximation is: a=8hS2+2h
Substituting the values: a=8×0.61.82+20.6=4.83.24+0.3=0.675+0.3=0.975 m
Therefore:
- Major axis (2a) = 1.95 m
- Minor axis (2b) = 1.2 m
Step 1: Prepare Materials and Tools
Materials:
- Plywood sheets (18–25 mm thick) or softwood planks for ribs
- Softwood battens for struts and bracing
- Nails or screws
- Timber for props and sole plates
Tools:
- Measuring tape
- Pencil
- String or flexible strip for drawing ellipse
- Hand saw or jigsaw
- Hammer
- Spirit level
- Try square
Step 2: Draw the Ellipse
To draw an ellipse for your centre:
- Draw a horizontal line equal to the span (S) as the base.
- Mark the centre point of the base.
- From the centre, measure up a distance equal to the rise (h) to find the highest point of the arch.
- Use the trammel method or string method to draw the ellipse:
- Trammel method: Attach a pencil to one end of a rod. The rod has two pins at the other end that slide in two grooves (one horizontal, one vertical). This creates a perfect ellipse.
- String method: Fix two pins at the foci of the ellipse. Tie a string around both pins and the pencil. As you move the pencil, it traces an ellipse.
Step 3: Cut the Ribs
- Transfer the drawn ellipse onto plywood or timber sheets.
- Cut two or more identical ribs using a jigsaw or hand saw.
- For larger spans, use multiple ribs (typically 3–5 ribs depending on the arch width).
- The upper edge of each rib must match the ellipse curve exactly.
Step 4: Assemble the Centre
- Cut vertical struts to support the ribs at appropriate intervals (every 300–400 mm).
- Fix the ribs to the struts using nails or screws.
- Install horizontal ties across the bottom of the ribs to prevent spreading.
- Add diagonal braces between struts for stability.
- Attach lagging (small strips) across the top of the ribs at close intervals to support the masonry.
Step 5: Install and Check
- Position the centre between the wall supports.
- Use props to adjust the height so the arch sits at the correct level.
- Check with a spirit level to ensure the centre is horizontal and the ribs are properly aligned.
- Make final adjustments using wedges if needed.
Activity: Construct an elliptical centre for a doorway
A builder in Dar es Salaam needs to construct an elliptical arch over a doorway with the following specifications:
- Span = 1.2 m
- Rise = 0.45 m
- Arch thickness = 100 mm
Solution:
-
Calculate ellipse dimensions:
- Minor axis (2b) = 2 × 0.45 = 0.9 m
- Major axis (2a) = (1.2² ÷ (8 × 0.45)) + 0.45 = (1.44 ÷ 3.6) + 0.45 = 0.4 + 0.45 = 0.85 m
- Therefore, a = 0.425 m
-
Draw the ellipse using the string method with span 1.2 m and rise 0.45 m.
-
Cut 3 ribs from 18 mm plywood following the drawn curve.
-
Assemble the ribs with struts every 350 mm, add ties at the base, and fix lagging across the top.
-
Install the centre between the doorway supports and check alignment.
- Always wear appropriate PPE: safety boots, gloves, helmet, and overalls.
- Ensure the working area is clear of debris.
- Check all connections are tight before applying any load.
- Never work under an unstable centre.
- Use stable supports and check for any movement before proceeding with masonry work.
| Problem | Cause | Solution |
|---|---|---|
| Centre sags under weight | Ribs too thin or struts insufficient | Add more struts or use thicker timber |
| Arch shape not accurate | Incorrect ellipse drawing | Redraw using proper geometric method |
| Centre spreads outward | Missing or loose ties | Install or tighten ties at the base |
| Wobbling during construction | Insufficient bracing | Add diagonal braces between struts |
In Tanzania, you will encounter elliptical arches in traditional Swahili architecture, in modern buildings in cities like Dar es Salaam and Arusha, and in bridge construction. A local artisan in Mwanza might construct an elliptical centre to create a decorative arch over a shop entrance, using locally sourced timber and basic tools. Understanding how to construct this centre enables a carpentry apprentice to participate in building projects that require arched openings, creating employment opportunities in the growing construction industry.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Interpret drawings
- Calculate materials required
- Prepare ribs
- Prepare laggings
- Fix lagging to ribs
- Erect and reinforce centering
- Dismantling centering
- Clean work place and tools
- Store tools to safe place
Tathmini ya matokeo
Constructed elliptical centering conform technical specifications
Tathmini ya maarifa
Detailed knowledge of: :
Method used: The student should explain methods related to construct elliptical centre
Principles: The student should explain principles related to construct elliptical centre
Theories: The students should explain theories related to construct elliptical centre
Circumstantial knowledge: Safety rules and regulation
Swali
What is the primary purpose of an elliptical centre in construction?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado