Sonzaschool
Rudi

Sekondari ya Kawaida · Kidato cha Tatu · Amali · Civil Engineering

Carpentry and Joinery With Metal Works

Constructing semi-circular centre

takriban dakika 4 kusoma

Majadiliano
Mada za sehemu hiiConstructing centeringMada 3

Constructing a Semi-Circular Centre

A semi-circular centre is a temporary wooden formwork used to support brickwork or masonry while constructing a semi-circular arch. It holds the arch in place until the mortar sets and the structure becomes self-supporting.

Definition and Purpose

Centering is the temporary structure required to support bricks, stone, or concrete arches during construction until they gain sufficient strength to stand alone. A semi-circular centre gets its name from its curved shape, which matches the intrados (inner curve) of the arch being built.

Components of a Semi-Circular Centre

  • Turning piece: Horizontal wooden pattern that forms the curve of the arch from one end to the other
  • Ribs: Arc-shaped members that give the centre its arch shape; usually made from plywood or thick planks
  • Tie: Horizontal member placed across the lowest half to prevent the centre from spreading outward
  • Lagging: Small timber pieces fixed across the ribs to support the voussoirs (wedge-shaped arch stones/bricks)
  • Bearer: Wood attached beneath the ties to keep ribs from moving apart
  • Struts: Timber members that support the ribs in larger centres
  • Props: Vertical pillars that hold the centre at the correct height
  • Wedges: Spacers between props and bearers for minor height adjustments
  • Span: The horizontal distance between the two openings (jambs) the arch bridges

Geometry of a Semi-Circular Arch

For a true semi-circular arch:

  • The radius (R) equals half the span: R=S2R = \frac{S}{2}
  • The rise (h) equals the radius: h=R=S2h = R = \frac{S}{2}

Worked Example

If the span (S) of an arch opening is 1.5 metres:

  • Radius R = 1.5 ÷ 2 = 0.75 m (75 cm)
  • Rise h = 0.75 m

Procedure for Constructing a Semi-Circular Centre

  1. Determine dimensions: Calculate the radius using R = S/2. Decide on the number of ribs (at least 3 ribs for normal spans; more for longer spans).

  2. Mark and cut the ribs:

    • Draw a baseline equal to the span on plywood (18–25 mm thick)
    • Use a trammel or compass set to the calculated radius
    • Draw the semicircle and cut two identical ribs with a jigsaw
  3. Assemble the centering:

    • Cut vertical struts (supports) to the required height
    • Cut a base ledger (horizontal member)
    • Fix ribs to struts every 300–400 mm using screws or nails
    • Add bottom cross-braces for stability
  4. Test and adjust:

    • Place between temporary supports (such as bricks or blocks)
    • Ensure the arch sits level and fits snugly within the span
  5. Finish:

    • Sand rough edges
    • Label parts if required

Materials and Tools Required

Materials: Plywood (18–25 mm thick) or softwood planks for ribs, softwood battens for struts and bracing, nails or screws, wood glue (optional).

Tools: Measuring tape, pencil, compass or trammel, handsaw or jigsaw, hammer, screwdriver, try square, clamps, sandpaper.

Safety Requirements

Always wear appropriate protective equipment:

  • Safety boots
  • Overall
  • Helmet
  • Leather gloves

Key Considerations

  • The distance between the two ribs should match the wall thickness the arch will carry
  • For large spans, use built-up ribs instead of solid timber
  • Provide a pair of wedges between supports and bearing pieces to allow lowering of the centering after the mortar sets
  • The centering must remain in place until the mortar has sufficiently hardened

Real-life application

In Tanzania, a carpenter or mason would use a semi-circular centre when constructing a semi-circular arch over a door or window in a traditional building, such as a mosque or a modern hotel in Arusha or Dar es Salaam. For example, when building a decorative arch entrance at a small restaurant in Mwanza, the craftsman would first construct the semi-circular centre to support the brickwork until the cement mortar sets, ensuring the arch maintains its correct shape and does not collapse during construction.

Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa

Tathmini ya mchakato

The student should be able to:

  • Interpret drawings
  • Calculate materials required
  • Prepare ribs
  • Prepare laggings
  • Fix lagging to ribs
  • Erect and reinforce centering
  • Dismantling centering
  • Clean work place and tools
  • Store tools to safe place

Tathmini ya matokeo

Constructed semi-circular centering conform technical specifications

Tathmini ya maarifa

Detailed knowledge of:

Method used: The student should explain methods related to construct semicircular centre

Principles: The student should explain principles related to construct semicircular centre

Theories: The students should explain theories related to construct semicircular centre

Circumstantial knowledge: Safety rules and regulation

Swali

Which component of a semi-circular centre prevents the ribs from moving apart horizontally?

Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.

Ingia ili kufanya mazoezi

Mwalimu

Umekwama? Niulize chochote kuhusu mada hii.

Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.

Ingia ili kuuliza

Majadiliano

Hakuna maswali bado

Ingia ili kuuliza
Inapakia majadiliano…