Mada za sehemu hiiConstructing capacitive circuitsMada 4
- Building a single capacitor circuit
- Building series capacitor circuit
- Building parallel capacitor circuit
- Building combination capacitor circuit
Building a Single Capacitor Circuit
A capacitive circuit is a circuit without resistance or inductance. A capacitor is an electronic device that stores electrical charge in an electric field by accumulating electric charges on two closely spaced surfaces that are insulated from each other. It is a passive electronic component with two terminals.
The ability of a capacitor to store charges is called capacitance, abbreviated as C. The SI unit of capacitance is the Farad (F).
One farad is a very large amount of capacitance. In practice, we use smaller units:
| Sub-unit | Symbol | Conversion |
|---|---|---|
| Picofarad | pF | 1 pF = 10⁻¹² F |
| Nanofarad | nF | 1 nF = 10⁻⁹ F |
| Microfarad | μF | 1 μF = 10⁻⁶ F |
| Millifarad | mF | 1 mF = 10⁻³ F |
A capacitor consists of:
- Two metallic plates placed very close to each other, in parallel
- An insulator called a dielectric placed between the plates to prevent them from touching
The dielectric can be made of ceramic, paper, plastic film, air, or vacuum.
Capacitors are classified into two main groups:
(a) Polarized Capacitors
- Contain a positive and negative lead
- Must be connected based on polarity (positive to positive, negative to negative)
- Common type: Electrolytic capacitor
(b) Non-Polarized Capacitors
- Can be connected without polarity consideration
- Can pass current in either direction
- Common types: ceramic, mica, paper, plastic film, and tantalum capacitors
Before building a single capacitor circuit, gather the following:
| Item | Purpose |
|---|---|
| Capacitor | Stores electrical charge |
| Breadboard | Used for building temporary circuits |
| Connecting wires | Conduct electricity between components |
| 0-30V DC variable power supply | Provides DC voltage |
| Multimeter | Measures voltage and capacitance |
| Combination pliers | For handling wires |
| Safety goggles | Protects eyes |
| Overalls | Protects body |
| Safety boots | Protects feet |
When building a capacitor circuit, always observe the following:
- Disconnect power before making or modifying connections
- Avoid short circuits which can damage components or cause injury
- Handle polarized capacitors correctly — connect positive to positive and negative to negative
- Discharge capacitors before handling them to avoid electric shock
- Wear safety gear including goggles, overalls, and boots
- Work on a clean, dry workbench

Follow these implementation steps:
- Prepare the circuit diagram — Draw a simple circuit showing the capacitor connected to a power source
- Select a capacitor — Choose a capacitor with the desired capacitance value (e.g., 10 μF)
- Check the capacitor — Verify the capacitance using a multimeter; ensure the voltage rating is sufficient
- Identify capacitor terminals — For polarized capacitors, identify the positive (+) and negative (-) leads
- Plug the capacitor onto the breadboard — Insert the leads into appropriate rows
- Connect the wires — Connect one wire from the positive terminal of the power supply to one plate of the capacitor, and from the other plate back to the negative terminal
- Set the power supply — Adjust to the desired voltage (e.g., 6V DC) and connect to the circuit
- Observe the circuit — The capacitor will charge up; voltage can be measured across the capacitor
- Clean the workplace — Disconnect power and organize tools after completion
Example: A 10 μF capacitor is connected to a 6V DC power supply.
(a) Calculate the charge stored on the capacitor.
Solution:
The relationship between charge (Q), capacitance (C), and voltage (V) is:
Q=CV
Where:
- Q = charge in coulombs (C)
- C = capacitance in farads (F)
- V = voltage in volts (V)
Given:
- C = 10 μF = 10 × 10⁻⁶ F = 10⁻⁵ F
- V = 6V
Calculation: Q=10−5×6=6×10−5C=60μC
The charge stored is 60 microcoulombs (μC).
When a capacitor is connected to a DC circuit:
- Initially (uncharged): The capacitor acts like a short circuit (zero voltage across it, maximum current flows)
- After charging: The capacitor becomes fully charged and acts like an open circuit (no current flows, voltage equals supply voltage)
- When fully charged: Current stops flowing because the voltage across the capacitor equals the supply voltage
This behavior is why capacitors are used in timing circuits, filters, and energy storage applications.
In Tanzania, capacitors are commonly found in camera flashes used by photographers at weddings and events. When you press the flash button, a capacitor quickly stores electrical energy and then releases it all at once to produce a bright burst of light. This same principle is applied in X-ray machines at hospitals like Muhimbili National Hospital, where capacitors store and release energy to generate the X-ray beam. Understanding how to build and test a single capacitor circuit is the foundation for working with such equipment.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Design a circuit diagram of the capacitive circuit.
- Identify equipment, tools, and materials required.
- Prepare capacitors and cables for termination.
- Build a single capacitor circuit.
- Solder the built circuits.
- Measure and record the capacitive parameters of the circuits.
- Apply safety precautions.
- Clean work area, tools, and equipment.
Tathmini ya matokeo
Capacitive current conforms to the electrical block diagram.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to: Build a singlecapacitive circuit.
Principles: The student should explain the principles related to building a single capacitive circuit.
Theories: The student should explain:
- Symbols for capacitor.
- Properties of dielectric materials
Detailed knowledge about:
- Hazards Control Safe handling of work tools, and equipment.
Swali
What are the three main components of a capacitor?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado