Sonzaschool
Rudi

Sekondari ya Kawaida · Kidato cha Nne · Amali · Automotive Engineering

Agro-mechanics

Carrying out chain survey

takriban dakika 4 kusoma

Majadiliano
Mada za sehemu hiiPerforming land surveyingMada 5

Chain survey is the simplest and most common method of measuring distances and areas in land surveying. It uses a chain and other simple tools to measure straight lines between points on the ground. In agro-mechanics, chain survey helps farmers and agricultural engineers measure land for planning irrigation, fencing, and farm layout.

Definition and Uses of Chain Survey

Chain survey is a type of land surveying where only linear measurements are taken using a chain or tape measure. It is suitable for small and level areas with few obstacles.

Uses of chain survey in agriculture:

  • Measuring farm boundaries and land area
  • Planning irrigation channels and drainage systems
  • Laying out farm structures such as barns, stores, and cattle pens
  • Determining positions of trees, posts, and other fixed objects
  • Preparing land for planting in rows or blocks

Equipment Needed for Chain Survey

The following tools are used:

  • Surveying chain (20m or 30m chain) – main measuring tool
  • Arrows or ranging rods – for marking measurement points
  • Measuring tape – for shorter distances
  • Cross-staff or optical square – for setting right angles
  • Pegs – for permanent marking of survey points
  • Hammer – for driving pegs into the ground
  • Notebook and pencil – for recording measurements
  • Safety boots – for personal protection

Steps in Carrying Out Chain Survey

Step 1: Reconnaissance survey Walk over the area to be surveyed. Identify the main features, boundaries, and obstacles. Decide on the survey stations (corner points) that will form the framework of the survey.

Step 2: Selecting survey stations Choose stations that are:

  • Clearly visible from each other
  • Located at corners of the area
  • On firm, stable ground
  • Free from obstacles in the measuring line

Mark each station with a peg.

Step 3: Clearing the survey line Remove grass, shrubs, and obstacles along the lines between stations to allow easy measurement.

Step 4: Measuring distances Starting from the first station, stretch the chain along the survey line to the next station. Read the measurement at the exact point and record it in the notebook. Use arrows to mark each full chain length.

Step 5: Taking offsets For features that are not on the main survey lines (such as trees, buildings, or water points), measure perpendicular distances from the main line to these features. This is done using a cross-staff or by measuring along a short line at right angles.

Step 6: Recording measurements Write all measurements clearly in a field book. Include:

  • Station numbers
  • Distances between stations
  • Offsets to features
  • Notes about the area

Step 7: Calculating area After completing the survey, calculate the area of the surveyed land using the recorded measurements. For rectangular or irregular shapes, divide the area into triangles and calculate each triangle's area.

Worked Example

A farmer wants to measure a rectangular piece of land for planting maize. The chain survey gave the following measurements:

  • Length of land (AB) = 120 meters
  • Width of land (BC) = 80 meters

Calculation:

Area = Length × Width

Area = 120 m × 80 m = 9,600 square meters (m²)

To convert to acres (1 acre = 4,047 m²):

Area in acres = 9,600 ÷ 4,047 ≈ 2.37 acres

Therefore, the farmer has approximately 2.37 acres of land for planting maize.

Precautions During Chain Survey

  • Ensure the chain is straight when measuring – avoid sagging
  • Keep the chain taut and level on slopes
  • Record measurements immediately to avoid forgetting
  • Check the chain for damage before use
  • Wear safety boots throughout the survey

Real-life application

A small-scale farmer in Morogoro can use chain survey to measure his or her farm before applying for an agricultural loan from a bank or microfinance institution. Banks often require accurate land size documentation — for example, a 1.5-hectare (15,000 m²) plot measured using a 30m chain will help the farmer demonstrate the exact area when requesting 2,000,000 TZS in credit for purchasing seeds, fertilizers, or a simple irrigation pump.

Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa

Tathmini ya mchakato

Students should be able to:

  • Interpret technical drawings.
  • Use service manuals.
  • Select tools and equipment.
  • Carry out chain survey
  • Observe safety precautions
  • Clean tools, equipment and work place.
  • Store tools and equipment.

Tathmini ya matokeo

Chain surveying according to Technical specifications.

Tathmini ya maarifa

Knowledge evidence:

Detailed knowledge of:

Methods used: Students should explain how to:

  • Use chain survey data to draw maps or plans
  • Undertake tools and machines preventive maintenance.

Principles: Students should explain the principle of:

  • Carry out chain survey

Theories: Students should:

  • Define the various terms used in chain survey
  • Record chain survey data in the notebook as per standards
  • Record data and correct errors in chain survey using standard methods
  • Use chain survey data to draw maps or plans

Circumstantial knowledge:

Detailed knowledge about:

  • Safety precautions while performing with chain survey tools.
  • Safe handling of working tools and equipment. Waste disposal.

Swali

Which of the following is the FIRST step in carrying out a chain survey?

Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.

Ingia ili kufanya mazoezi

Mwalimu

Umekwama? Niulize chochote kuhusu mada hii.

Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.

Ingia ili kuuliza

Majadiliano

Hakuna maswali bado

Ingia ili kuuliza
Inapakia majadiliano…