Mada za sehemu hiiPerforming land surveyingMada 5
Contour Survey in Agro-mechanics
A contour survey is a method of mapping the elevation changes of land by drawing contour lines on a plan. A contour line connects points of equal elevation above a reference point, usually mean sea level. This type of survey shows the shape and slope of the land, which is essential for planning agricultural activities, irrigation systems, and construction projects.
Contour surveys are important in agriculture for several reasons:
- Water management: Contour lines help identify where water will flow during rainfall, allowing farmers to design proper drainage and irrigation systems.
- Soil conservation: By understanding the land's slope, farmers can plant crops along contour lines to reduce soil erosion.
- Land levelling: Contour maps guide contractors when levelling land for building structures or creating farm ponds.
- Crop planning: Knowing the elevation changes helps farmers decide which crops are suitable for different parts of the land.
Before starting a contour survey, gather the following equipment:
- Surveying tripod and level (auto-level, laser level, or hand level)
- Grade rods (fibreglass, aluminium, or wooden)
- Surveying markers or pegs
- Marking paint or flagging tape
- Tape measure
- Notebook for recording measurements
Safety gear required includes overalls and safety boots.
Step 1: Plan the Survey
- Determine the area to be surveyed
- Decide on the contour interval (the vertical distance between adjacent contour lines). Common intervals for agricultural land are 0.25m, 0.5m, or 1m.
- Identify a benchmark (a known elevation point) to start measurements
Step 2: Set Up the Level
- Place the tripod on stable ground near the centre of the survey area
- Mount the level (auto-level or laser level) on the tripod
- Adjust the level until the bubble is centreed (for spirit levels) or the laser is level (for laser levels)
Step 3: Take Elevation Readings
- Hold the grade rod at various points across the survey area
- Read the measurement through the level's telescope or collect the laser reading
- Record each point's location and elevation in a notebook
- Mark points of the same elevation with pegs or paint as you proceed
Step 4: Connect Points of Equal Elevation
- After collecting enough data points, connect all points with the same elevation
- These connected lines form the contour lines
- Ensure lines do not cross each other (except in rare cases like overhanging cliffs)
Step 5: Draw the Contour Map
- Transfer all field measurements to paper or computer software
- Draw contour lines connecting points of equal elevation
- Label each contour line with its elevation value
- Add north arrow, scale, and title to complete the map
Clean the level, the rods and the tape, check that nothing is missing, and store the equipment in its cases in a dry place. Remove pegs and flagging tape that are no longer needed.
A farmer in Morogoro wants to construct a farm pond. The field has the following elevation readings taken at 10-metre intervals along a transect:
| Point | Distance (m) | Elevation (m) |
|---|---|---|
| A | 0 | 542.00 |
| B | 10 | 541.75 |
| C | 20 | 541.50 |
| D | 30 | 541.25 |
| E | 40 | 541.00 |
| F | 50 | 540.75 |
Using a contour interval of 0.25m, the contour lines would pass through points at elevations of 542.00m, 541.75m, 541.50m, 541.25m, 541.00m, and 540.75m. The farmer can now see that the land slopes downward from point A toward point F, which helps determine the best location and size for the pond.
- Contour lines never cross each other on normal terrain
- Closer contour lines indicate steeper slopes; wider spacing indicates gentle slopes
- Contour lines form closed loops (even if partially outside the surveyed area)
- Always start from a known benchmark to ensure accuracy
- Record all measurements clearly with proper units (metres for elevation)
In Tanzania, smallholder farmers in regions like Dodoma and Singida often face challenges with water conservation during the dry season. By carrying out a simple contour survey using basic tools like a hand level and wooden poles, farmers can identify the best locations to build terraces or small water-harvesting structures. For example, a farmer with a 1-hectare plot can use contour survey results to construct contour bunds that trap rainwater, which helps crops through dry spells.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
Students should be able to:
- Interpret technical drawings.
- Use service manuals.
- Select tools and equipment.
- Carry out contour survey
- Observe safety precautions
- Clean tools, equipment and work place.
- Store tools and equipment.
Tathmini ya matokeo
Land surveying according to Technical specifications.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Methods used: Students should explain how to:
- Use contour survey data to draw maps or plans
- Undertake tools and machines preventive maintenance.
Principles: Students should explain the principle of:
- Carrying out contour survey
Theories: Students should:
- Define the various terms used in contour survey
- Record contour survey data in the notebook as per standards
Circumstantial knowledge:
Detailed knowledge about:
- Safety precautions while performing with contour survey tools.
- Safe handling of working tools and equipment.
- Waste disposal.
Swali
What is a contour survey?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado