Mada za sehemu hiiPerforming land surveyingMada 5
A compass survey is a method of determining the direction and distance between points on land using a compass and a measuring tape. In agro-mechanics, this technique is essential for mapping fields, planning farm layouts, and establishing boundaries before agricultural construction or cultivation.
A compass survey is a land surveying method that uses a magnetic compass to determine horizontal directions (bearings) and a measuring tape or chain to determine distances. The compass measures the angle of a survey line relative to magnetic north, allowing surveyors to create a basic map or plan of an area without needing sophisticated electronic equipment.
- Determining field boundaries and farm sizes
- Planning irrigation channels and drainage systems
- Laying out farm structures such as barns, stores, and processing units
- Mapping areas for crop rotation and field division
- Establishing reference lines for grading and levelling
Primary Equipment
- Surveyor's compass (prismatic compass or surveyor's compass)
- Surveying tripod or bipod
- Measuring tape (30 m or 50 m)
- Ranging rods or poles
- Marking pins or arrows
Supporting Equipment
- Marking paint or chalk
- Field book for recording observations
- Pencil and eraser
- Calculator
Safety Gear
- Overalls
- Safety boots
- Hand gloves
Step 1: Planning the Survey
- Visit the site and identify the area to be surveyed
- Determine the survey stations (corner points of the area)
- Sketch a rough plan showing the proposed traverse route
Step 2: Setting Up the Compass
- Place the tripod or bipod at the first survey station
- Mount the compass on the tripod and ensure it is level
- Allow the magnetic needle to settle and observe the north direction
Step 3: Taking Bearings
- Sight the ranging rod at the next station through the compass
- Read the bearing (angle from magnetic north) to the nearest degree
- Record the bearing in the field book immediately
Step 4: Measuring Distances
- Stretch the measuring tape from one station to the next
- Record the distance in metres to two decimal places
- Ensure the tape is straight and level
Step 5: Recording Observations
- Record bearing and distance for each survey line in the field book
- Use a systematic format: Station, Bearing (°), Distance (m)
- Include notes about terrain features or obstacles
Step 6: Closing the Traverse
- Return to the starting point to check accuracy
- Calculate the error of closure if possible
- Make adjustments if the error is within acceptable limits
A farmer wants to survey a rectangular piece of land for constructing a grain store. The survey starts at point A and proceeds clockwise.
| Station | Bearing (°) | Distance (m) |
|---|---|---|
| A to B | 90° | 50.0 |
| B to C | 180° | 30.0 |
| C to D | 270° | 50.0 |
| D to A | 0° | 30.0 |
Calculations:
- Total perimeter = 50.0 + 30.0 + 50.0 + 30.0 = 160.0 m
- Area of rectangle = length × width = 50.0 m × 30.0 m = 1,500 m²
- The bearing of line AB is 90° (east), BC is 180° (south), CD is 270° (west), and DA is 0° (north)
- Always hold the compass away from metal objects (knives, watches, belts) that can affect the magnetic needle
- Take readings when the needle is steady; avoid reading near vehicles or steel structures
- Record bearings as whole degrees (e.g., 45° not 45.5°)
- Work in pairs: one person sights while another reads and records
- Wear overalls and safety boots throughout the survey
- Ensure tripod legs are securely planted to prevent equipment falls
- Be aware of snakes and insects in tall grass when placing survey points
- Carry water and protect yourself from sun exposure
A small-scale maize farmer in Morogoro region needs to divide his 2-hectare plot into three equal sections for crop rotation. Using compass survey, he can measure the boundaries, calculate the exact area of each section, and mark the division lines with pegs. This helps him plan where to plant maize, beans, and cassava in different seasons, maximizing soil fertility and harvest yields without spending money on expensive professional surveyors.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
Students should be able to:
- Interpret technical drawings.
- Use service manuals.
- Select tools and equipment.
- Carry out compass survey
- Observe safety precautions
- Clean tools, equipment and work place.
- Store tools and equipment.
Tathmini ya matokeo
Compass survey carried out according to Technical specifications.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Methods used: Students should explain how to:
- Use Compass survey data to draw maps or plans
- Undertake tools and machines preventive maintenance.
Principles: Students should explain the principle of:
- Carry out a compass survey
Theories: Students should:
- Define compass survey
- Record compass survey data in the notebook as per standards
- Record data and correct errors in compass survey using standard methods
- Use compass survey data to draw maps or plans
Circumstantial knowledge:
Detailed knowledge about:
- Safety precautions while performing with compass survey tools.
- Safe handling of working tools and equipment.
- Waste disposal.
Swali
What two main instruments are used in a compass survey to determine horizontal directions and distances?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado