Mada za sehemu hiiPreserving raw hides and skinsMada 5
Washing Hides and Skins
Washing hides and skins is the first step in preparing raw hides and skins for leather tanning. After preserving hides with salt, dirt, blood, salt crystals, and other impurities must be removed before the hide can be processed further. This cleaning process is called washing or soaking, and it prepares the hide for the subsequent stages of leather making.
Washing removes substances that could spoil the leather during tanning. If dirt and salt remain, they will:
- Cause the leather to become brittle and crack
- Create uneven colouring during dyeing
- Lead to bad smells and decay
- Reduce the strength and quality of the final leather product
A properly washed hide ensures that tanning chemicals can penetrate evenly, producing high-quality leather goods.
1. Prepare the Workspace
- Set up a clean workbench or use a leather horse (a curved stand for holding hides)
- Place plastic containers or buckets filled with clean water nearby
- Wear protective clothing: overall or dust coat, rubber gloves, safety boots, and a mask
2. Soak the Hide
- Immerse the preserved hide in a container of clean water
- The water temperature should be lukewarm (not hot, not cold)
- Allow the hide to soak for 30 minutes to 2 hours
- Soaking loosens dried blood, dirt, and excess salt
3. Scrub the Hide
- Use a hard broom or brush to scrub both the flesh side (inner side) and the hair side (outer side)
- Pay special attention to areas with thick dirt buildup
- This removes embedded impurities that soaking alone cannot remove
4. Rinse Thoroughly
- Drain the dirty water and refill the container with fresh clean water
- Rinse the hide repeatedly until the water runs clear
- No salt crystals or dirt should remain in the water
5. Drain and Prepare for Next Stage
- After rinsing, allow the hide to drain on the leather horse or hang on a water horse
- The hide should be damp but not dripping wet before moving to the next step in tanning
- Always wear rubber gloves to protect hands from dirt and bacterial contamination
- Wear safety boots to keep feet dry and safe from wet floors
- Use a mask when working with preserved hides to avoid inhaling dust or odours
- Work in a well-ventilated area to prevent buildup of unpleasant smells
A local tanner in Arusha has received 5 salted cow hides from a nearby slaughterhouse. Before tanning, the tanner must wash them:
- Soak each hide in a plastic container of lukewarm water for 1 hour
- Scrub with a hard broom to remove dried blood and dirt
- Rinse three times with fresh water until the water is clear
- Hang each cleaned hide on a leather horse to drain
After washing, the hides are ready for the next stage of tanning. This process ensures the leather will be strong and suitable for making shoes, belts, or bags.
Washing hides and skins is an essential cleaning step that removes dirt, salt, and blood from preserved hides. It involves soaking, scrubbing, and rinsing with clean water. Proper washing improves the quality of the final leather product and ensures the tanning chemicals work effectively.
In Tanzania, many small-scale tanners in towns like Morogoro, Arusha, and Mwanza wash hides before processing them into leather for sale at local markets. For example, a youth group running a small leather workshop might wash 10 goat skins collected from nearby villages, clean them using this method, and then tan them to make wallets or sandals that they sell for TSh 15,000 to TSh 50,000 each to tourists and local customers. This skill directly supports income-generating activities in rural and peri-urban communities.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Inspect leather defects
- Prepare bran solution
- Wash raw hide and skin
- Stretch out hides and skins
- Observe safety
- Clean hides and skin
- Clean tools and equipment
- Store raw hides and skins
- Store tools and equipment rocess Assessment
Tathmini ya matokeo
Raw hides and skins are clean and neat as per required specifications
Tathmini ya maarifa
Knowledge Evidence: Detailed knowledge of:
Method used: The student should explain how to: Wash hides and skins
Principles: The student should explain the principles of:
- Wash hides and skin
- Drying raw hides and skins
- Folding raw hides and skins
- Storing raw hides and skins
Theories: The student should explain:
- The importance of washing hides and skin
- Uses of raw hides and skins
- The importance of precise and detailed work while washing raw hide and skins
Circumstantial knowledge: Detailed knowledge of:
- Safety precautions pertaining when washing hides and skin
- Safe handling of working tools and equipment
Swali
What substances are removed from hides during the washing process?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado