Mada za sehemu hiiDesigning intermediate patterns for footwear projectsMada 4
- Making Oxford shoe patterns
- Making sandal patterns
- Making training shoe patterns
- Making military boot patterns
Making Training Shoe Patterns
Meaning of a Training Shoe
A training shoe is a type of footwear primarily designed for sports and physical exercises. It provides enhanced stability, cushioning, and traction to protect the wearer during training activities.
Parts of a Training Shoe
Training shoes consist of two basic parts:
-
Upper part – Covers the entire top of the foot, above the sole. Components are stitched together to form a single unit. Some training shoes include an Achilles tendon protector, reinforced collar, and padding for maximum comfort.
-
Bottom part – The portion that sits beneath the wearer's foot, including the outsole, midsole, and insole.
Tools, Equipment, and Materials
Tools:
- Sports shoe last
- Cutting knife
- Pencil
- Flexible measuring tape
- Set of punches
- Awl
- Scissors
- Cutting board
- Marking pen
Equipment:
- Computer
- Plotter
- Workbench
Materials:
- Hard manila paper
- Soft manila paper
- Masking tape
Differences Between Training Shoes and Other Shoes
Training shoes differ from other footwear in several ways:
- Enhanced stability – They offer maximum balance due to flat soles and cushion pads
- Better cushioning – Provides protection from common training injuries
- Greater durability – Cushion pads last longer due to their stability
- Good ventilation – Allows air circulation to reduce foot fatigue
- Lightweight materials – Reduces fatigue during extended use
- Good grip – Provides traction on various surfaces
Procedure for Making Training Shoe Patterns
Follow these steps to construct training shoe patterns:
Step 1: Cover the last with masking tape Select an appropriate sports shoe last and cover it completely with masking tape, ensuring the surface is smooth without wrinkles.
Step 2: Draw the style lines Draw the style lines on the shoe last shell, indicating where different pattern pieces will be separated.
Step 3: Construct the toe cap and top-line contours The toe cap contour starts from point P to point Q, positioned 5 mm away from point E on the vamp line. Point P is 13 mm away from the centreline.
Step 4: Construct quarter and counter contours Draw the contours for the quarter (side part) and counter (heel back part) according to the design specifications.
Step 5: Construct a standard pattern Add a lasting allowance around the feather line (approximately 20mm). Design a heel grip to complete the standard pattern.
Step 6: Separate basic pattern pieces
The cap pattern:
- Align the toe cap centreline with the folded edge of pattern paper
- Copy the toe cap contours and add 10mm for underlay allowance
- Cut through both layers, cut notches, unfold, and label
Overlay collar pattern:
- Copy the contours, eyelet markers, and other necessary markers
- Cut and unfold, then label
Quarter pattern:
- Copy quarter contours with markers on folded paper
- Add 3mm trimming allowance and 8mm underlay allowance
- Cut, unfold, and label
Counter pattern:
- Copy counter contours on folded paper
- Add 3mm trimming allowance
- Cut, unfold, and label
Tongue pattern:
- Copy the tongue pattern in three sections (upper 1/3, middle 1/3, lower 1/3)
- Add a 12mm stitching line marker
- Cut, unfold, and label
Step 7: Construct lining standard pattern Lay the standard pattern on pattern paper and trace its outside contour. Copy the tongue lining, counter lining, and vamp lining contours.
Worked Example: Constructing a Toe Cap Pattern
When making a toe cap pattern:
- Place the standard pattern with the toe cap centreline aligned along the folded edge of the pattern paper
- Copy the toe cap contours from the standard pattern
- Add 10mm for underlay allowance around the edges
- Cut through both layers of the folded paper
- Cut the notches (small cuts that help align pieces during assembly)
- Unfold the pattern and cut the inside marker
- Label the pattern with its description (e.g., "Toe Cap – Right")
Activity: Constructing Basic Lining Patterns
To make training shoe lining patterns:
- Quarter lining pattern – Trace from the standard pattern and reduce by 10mm from the lasting allowance
- Counter lining pattern – Follow the same procedure
- Vamp lining pattern – Construct using the vamp section of the standard pattern
Safety and Maintenance
- Always handle cutting knives and awls carefully to avoid injuries
- Keep tools sharp and properly maintained
- Clean tools after use and store them in appropriate places
- Maintain a clean working environment
Real-life application
In Tanzania, a young entrepreneur in Arusha or Dar es Salaam who learns to make training shoe patterns can start a small workshop producing sports shoes for local football teams and gym users. By creating their own patterns, they can customize shoes for local preferences, reduce production costs, and sell customized training shoes at markets like Mwenge or Kariakoo, generating income while meeting the growing demand for affordable sports footwear among youth and fitness enthusiasts.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to appropriately:
- Select tools and equipment
- Distinguish different colours
- Identify the required designs
- Select shoe lasts
- Prepare masking tape
- Prepare tracing papers
- Cover the shoe last with masking tape
- Trace the shoe last based on the design
- Draw the main lines
- Remove the traced masking tape
- Stick on draft paper
- Sketch the design
- Cut master patterns
- Develop the patterns
- Cut different parts of footwear patterns
- Transfer patterns into hand cartons or manilla.
- Grade patterns
- Insert marking points
- Group patterns into sizes
- Observe safety
- Clean workplace
- Clean tools and equipment
- Store patterns
- Store tools and equipment
Tathmini ya matokeo
A patterns for raining shoe is designed according to hoe specifications
Tathmini ya maarifa
Knowledge Evidence:
Detailed knowledge of:
Method used: The student should correctly:
- Take foot measurement
- Mask shoe lasts
- Trace different designs
- Trace standard pattern lines
- Transform sketches
- Produce master patterns
- Develop patterns
- Grade patterns
Principles: The student should clearly explain he principles of:
- Designing
- Taking foot measurements
- Pattern cutting
- Standard size chart
Theories: The student should correctly explain:
- Imaginary lines on he lasts
- The units of measurements used in footwear making
- Designing techniques
- Importance of precise and detailed work while making training shoe patterns
Circumstantial knowledge:
- Safe handling of tools and equipment
- Safe handling of patterns
- First aid
- Waste disposal
Swali
What is the primary purpose of a training shoe?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado