Mada za sehemu hiiDesigning and making ice making machineMada 7
An ice maker is a domestic appliance that produces ice cubes automatically. It is a common component in modern refrigerators and can also be a standalone machine. In this learning activity, you will design and make the body (the outer shell or casing) of a simple ice maker using metalworking tools and techniques.
Before starting the practical work, your class will discuss and define what an ice maker does:
- It freezes water into ice cubes
- It stores the ice until it is needed
- It dispenses ice for cooling drinks and preserving food
- It consists of three main parts: the body (casing), the cooling system, and the control system
The body protects the internal components and gives the appliance its shape and appearance.
The following tools and equipment are required for making an ice maker body:
| Category | Tools/Equipment |
|---|---|
| Cutting | Shearing machine, Oxy-acetylene plant |
| Forming | Bending machine, Pipe benders |
| Joining | Pop rivet gun, Soldering gun, Resistance welding machine |
| Finishing | Drilling machine, Electromechanical tool kit |
| Assembly | Bench with bench vice, Plumbing tools |
| Measuring | Tape measure |
| Design | Computer with CAD (optional for design) |
| Safety | Safety gears (goggles, gloves, aprons) |
1. Planning and Design
- Decide on the size and shape of the ice maker body
- Draw a simple sketch showing all dimensions
- Common dimensions for a small domestic ice maker: approximately 30 cm × 30 cm × 40 cm
2. Preparing the Materials
- Select appropriate sheet metal (usually galvanized iron or stainless steel, 0.5–1 mm thick)
- Measure and mark all cutting lines using a tape measure and marker
- Check measurements twice before cutting
3. Cutting the Metal Sheets
- Use the shearing machine to cut sheets to the required sizes
- You will need:
- Two side panels (e.g., 30 cm × 40 cm)
- One front panel (e.g., 30 cm × 40 cm)
- One back panel (e.g., 30 cm × 40 cm)
- One top panel (e.g., 30 cm × 30 cm)
- One bottom panel (e.g., 30 cm × 30 cm)
4. Forming and Bending
- Use the bending machine to create folds and edges for strength
- Bend edges at 90° where panels will join
- Use pipe benders if you need to add tube openings for refrigeration pipes
5. Drilling Holes
- Mark positions for holes where components will be attached
- Use the drilling machine to create holes for:
- Mounting the cooling system
- Securing the door or lid
- Installing the control panel
6. Joining the Panels
- Align all panels in their correct positions
- Secure panels together using one of these methods:
- Pop rivets — quick and suitable for thin sheets
- Resistance welding — strong and permanent joints
- Soldering — useful for sealing joints
7. Finishing
- File any sharp edges to prevent injury
- Clean the surface to remove grease and dirt
- Apply protective coating (paint or anti-corrosion coating) if needed
8. Safety Check
- Inspect all joints for tightness
- Ensure no sharp edges are exposed
- Verify that the body is structurally sound
A student group decides to make an ice maker body with the following external dimensions:
- Width: 300 mm
- Depth: 300 mm
- Height: 400 mm
Calculate the sheet metal sizes needed (assuming 2 mm allowance for joints):
| Panel | Width (mm) | Height (mm) | Quantity |
|---|---|---|---|
| Side panels | 300 | 400 | 2 |
| Front panel | 300 | 400 | 1 |
| Back panel | 300 | 400 | 1 |
| Bottom panel | 300 | 300 | 1 |
| Top panel | 300 | 300 | 1 |
Total sheet metal required: 6 pieces
- Always measure twice before cutting to avoid wasting material
- Wear safety goggles when cutting or drilling metal
- Use gloves when handling sheet metal edges
- Work in a well-ventilated area when using soldering or welding equipment
- Keep your workspace clean and organized
In Tanzania, ice makers are widely used in fish markets, restaurants, and small shops to preserve fresh catch and keep beverages cold. For example, a fish vendor at Mwanza's lwaleke market could use a locally made ice maker to keep tilapia fresh throughout the day, reducing spoilage and increasing profit. Knowing how to construct the ice maker body is a valuable skill for technicians who repair and maintain refrigeration equipment in their communities.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Identify materials, tools and equipment required
- Draw a mechanical working drawing
- Draw electrical wiring circuit diagram
- Prepare body structure of the ice making system
- Assemble parts to form the machine
- Mount the mechanical refrigeration components
- Perform wiring circuits for Primary and Secondary circuits
- Perform plumbing
- Evacuate and charge with refrigerant
- Perform spray painting
- Apply safety gears appropriately
- Clean workplace, tools and equipment
- Store tools and equipment
- Commission the machine
Tathmini ya matokeo
Designed and made ice maker conform to technical and aesthetic specifications
Tathmini ya maarifa
Knowledge Evidence:
Detailed knowledge of:
Method used: The student should explain how to:
- Plan work
- Measure electrical to pressure quantities
- Determine system character
- Make different types of ice making units
- Form ice
Principles: The student should explain the principles of: (c) Heat transfer and exchange (d) System operating characteristics (e) Design parameters
Theories: The student should explain:
- Components functions
- Refrigeration cycle
- Refrigerants properties
- Heat load estimation
Circumstantial knowledge:
Detailed knowledge about:
- Safe handling of working tools and equipment machines
- Plumbing
- Environmental Regulations
Swali
What is the main function of the ice maker body?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado