Mada za sehemu hiiDesigning and making liquid coolersMada 5
- Designing and draw schematic diagram
- Making juice cooler body
- Installing refrigerant pipe circuit
- Installing electrical wiring circuits
- Charging and commissioning the system
Designing and Drawing Schematic Diagrams in Refrigeration
A schematic diagram is a simplified graphical representation of a refrigeration system that shows how the main components are connected and how the refrigerant flows through the system. It uses standard symbols to represent each component, making it easy to understand the system layout without drawing realistic pictures.
Schematic diagrams are used by refrigeration technicians to:
- Plan and design refrigeration systems before installation
- Troubleshoot faults in existing systems
- Communicate system design to others
- Document the system for future maintenance
A simple domestic refrigerator consists of four main components connected in a closed loop:
- Compressor – compresses the refrigerant gas, raising its pressure and temperature
- Condenser – cools the high-pressure gas, turning it into liquid
- Expansion device – reduces liquid pressure, causing temperature drop (capillary tube in domestic fridges)
- Evaporator – absorbs heat from the refrigerator cabinet, evaporating the refrigerant
| Component | Symbol |
|---|---|
| Compressor | Circle with "M" or a circle with a triangle inside |
| Condenser | Zigzag line or series of bends |
| Evaporator | Zigzag line (similar to condenser) |
| Capillary tube | Thin straight line with an arrow |
| Filter drier | Small rectangle with mesh pattern |
| Thermostat | Circle with "T" |
| Fan | Circle with fan blades |
Step 1: Identify the System Requirements
Determine what type of refrigeration system is needed. For a domestic refrigerator, you need a simple vapor-compression system with four main components.
Step 2: Select the Components
Choose appropriate components based on:
- Refrigerant type (R-134a or R-600a commonly used in domestic fridges)
- Capacity requirements
- Available space
Step 3: Arrange Components in Logical Order
Place components in the order of refrigerant flow:
Compressor → Condenser → Capillary tube → Evaporator → Compressor
Step 4: Draw Using Standard Symbols
Use the correct symbols for each component. Ensure:
- Flow direction arrows are clearly marked
- Components are evenly spaced
- Connections are shown as straight lines
Step 5: Add Labels and Annotations
Label each component and include:
- Refrigerant type
- Approximate pressures (high and low side)
- Temperature readings where relevant
Draw a schematic diagram of a simple domestic refrigerator system.
Solution:
The diagram shows the four main components connected in sequence:
[Compressor] → [Condenser] → [Capillary tube] → [Evaporator] → [Compressor]
- The compressor is at the center-bottom of the diagram
- The condenser is located at the back or side of the refrigerator (shown as coiled pipes)
- The capillary tube connects condenser to evaporator (thin line)
- The evaporator is inside the freezer or fresh food compartment
- Arrows indicate the direction of refrigerant flow
Labels should include:
- High-pressure side (between compressor and condenser)
- Low-pressure side (between evaporator and compressor)
- Direction arrows showing clockwise flow
When drawing schematic diagrams:
- Use a drawing board with T-square for straight lines
- Keep proportions reasonable – components do not need to be to scale
- Ensure arrows are large enough to be clearly visible
- Print component names clearly below each symbol
- Leave space between components for clarity
- Always start with light pencil lines, then darken after checking
- Use set squares (30°-60° and 45°) for accurate angles
- Keep your drawing clean – use an eraser for mistakes
- Practice drawing standard symbols until you can do them quickly
- Forgetting to show direction of refrigerant flow
- Using pictorial drawings instead of schematic symbols
- Connecting components in wrong order
- Omitting labels or using unclear handwriting
- Not leaving space between components
In Tanzania, refrigeration technicians in cities like Dar es Salaam, Arusha, and Mwanza use schematic diagrams when installing or repairing refrigerators in homes, shops, and small businesses. For example, when a shopkeeper's display fridge stops cooling, a technician reads the schematic to identify whether the fault is in the compressor, condenser, or evaporator, then replaces the faulty part—saving the shop owner from buying a new refrigerator worth TSh 800,000 or more.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The students should be able to:
- Select materials, tools and equipment
- Draw detailed drawing and assembly drawings
- Draw electrical wiring circuits
- Clean workplace, tools and equipment
- Store tools and equipment
- Commission the system performance
Tathmini ya matokeo
Designed and made liquid coolers conform to the technical specifications and aesthetic appearance
Tathmini ya maarifa
Knowledge Evidence:
Detailed knowledge of:
Method used: The student should explain how to:
- Make different kind of coolers
- Apply safety measures
Principles: The student should explain the principles of:
- Heat transfer and exchange
- Design characteristics/parameters
Theories: The student should explain:
- The functional of components
- Refrigeration cycle
- Heat load estimation/calculations
Circumstantial knowledge:
Detailed knowledge about:
- Safe handling of tools, equipment and machines
- Environmental regulations
Swali
What is the main purpose of a schematic diagram in refrigeration systems?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado