Mada za sehemu hiiProducing architectural drawingsMada 6
Drawing Site Layout Plan
A site layout plan is a scaled drawing that shows the full extent of a site or plot for an existing or proposed building. It represents the boundaries and features of the construction site and organises how the space available will be used throughout the project.
Before learning to draw a site layout plan, you need to understand these key terms:
- Site – a piece of land on which something is located or is to be located
- Construction site – a designated area where all physical construction activities take place
- Plot ratio – the ratio of the total building floor areas to the plot area
- Plot coverage – the percentage of the total built-up ground floor areas to the plot area
- Setbacks – the allowable distances from the plot boundary to the edge of the building
A complete site layout plan includes:
- Size and shape of the plot
- Property line and surveyed beacons
- Existing structures and features (trees, roads)
- Proposed building outline
- Utility lines (water, sewage, electricity)
- Adjacent roads and their width
- Adjacent plots
- North direction (north arrow)
- Plot number
- Parking areas and driveway
- Landscaped areas
- Fence and gate positions
- Stormwater drainage system
Follow these ten steps in order:
-
Identify the shape and size of the site by drawing it to the actual dimensions of the plot size using a proper scale.
-
Indicate the north direction on the top right corner. Include all surveyed beacons with their coordinates if applicable.
-
Draw accessibility to the site, including the road accessing the site and the position of the main entrance.
-
Draw existing buildings, structures or features like trees if any exist on the plot.
-
Draw the outline of the proposed building based on regulations and allowable setbacks.
-
Indicate landscapes including soft and hard landscapes and parking lots.
-
Show drainage systems – position of wastewater drainage and disposal (sewer, septic tanks, soak-away systems, stormwater drainage).
-
Provide dimensions of the site plan including setbacks, landscape dimensions, and distances between structures.
-
Add grid or centre lines with grid numbers to assist in setting out the building's walls or columns.
-
Create a schedule showing the total plot area, ground floor built-up area, total floor area, plot coverage, and plot ratio.
Given: A rectangular plot measuring 30 m by 20 m. A house measuring 12 m by 10 m is to be built. The access road is along the shorter side of the plot. The site orientation is North–South.
Solution:
Step 1: Determine the scale For a 30 m × 20 m plot to fit on an A3 or A4 sheet, use a scale of 1:100.
- 30 m = 3000 mm → 3000 ÷ 100 = 30 cm on paper
- 20 m = 2000 mm → 2000 ÷ 100 = 20 cm on paper
Step 2: Draw the plot outline Draw a rectangle 30 cm × 20 cm and label it as the plot boundary. Add a north arrow at the top right corner.
Step 3: Apply setbacks Assume minimum setbacks of 2 m on all sides.
- Usable area: (30 - 4) m × (20 - 4) m = 26 m × 16 m
Step 4: Position the house Place the 12 m × 10 m house within the usable area, leaving space for:
- Parking area (near the entrance)
- Small garden (on the northern side for sunlight)
- Driveway connecting to the access road
Step 5: Calculate plot coverage
- Ground floor built-up area = 12 m × 10 m = 120 m²
- Plot area = 30 m × 20 m = 600 m²
- Plot coverage = (120 ÷ 600) × 100% = 20%
Step 6: Add all required elements Include: access road, main entrance gate, parking, garden, north arrow, dimensions, and title block.
- Always use a proper scale (commonly 1:100 or 1:200)
- Keep your drawing clean with consistent line weights
- Label all elements clearly
- Include a title block with project name, scale, and date
- Ensure the north arrow points in the correct direction
In Tanzania, site layout plans are essential when applying for a building permit from the municipal or district council. For example, if you are constructing a rental house in Mwanza or Dar es Salaam, the local authority requires a site layout plan showing setbacks, plot coverage, and how the land is used. This ensures the building complies with planning regulations and prevents disputes with neighbours.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select tools appropriate for the task
- Draw paper layout with title block
- Select appropriate scale and plan work
- Draw site layout plan
- Perform inking of the drawings
- Perform lettering of the drawings
- Clean drawing tools and store them
Tathmini ya matokeo
Site layout plans drawn according to set standards
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain the methods involved in producing site layout plans.
Principles: The student should explain the principles of:
- Drawing site layout plans
- Inking a drawing
- Lettering on the drawing
Theories: The student should explain:
- Dimensioning of a site layout plan
- Information shown on a site layout plan Circumstantial Detailed knowledge about:
- Safe handling of working tools
- Safe handling of drawing pens
Swali
What is a site layout plan?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado