Mada za sehemu hiiProducing architectural drawingsMada 6
Drawing Roof Plans
A roof is the topmost covering of a building or any structure. It protects the building against adverse weather effects such as rain, solar radiation, wind, and extreme temperature. A roof should have a slope to drain rainwater and snow. A roof plan is a view from the top of the building that shows the geometry in 2 dimensions (2D).
Understanding the key components of a roof is essential for reading and drawing roof plans:
- Roof covering: The roofing material exposed to the exterior environment (tiles, sheets, shingles)
- Truss: A framework typically consisting of rafters, posts, struts, and purlins for supporting the roof
- Eaves: The lower portion of a roof that overhangs the exterior wall to direct water away
- Gable: The portion of the front, rear, or side wall enclosed by the edges of a sloping roof
- Flashing: A strip of impervious material (usually metal) used to prevent water entry
- Hip: The outer angle formed by inclined planes between two intersecting roof slopes
- Ridge: The horizontal intersection at the apex of two rising roof surfaces
- Fascia board: A board fixed horizontally along the lower edge of a roof
- Rafter: A sloped structural component running from support to ridge
- Valley: The elongated area between two sloped surfaces that drains water to the eave
Pitched Roof
A pitched roof has a sloping surface(s) with an angle greater than 10°. Common types include:
- Mono-pitched (lean-to): Single sloping roof surface
- Double-pitched: Two sloping surfaces in opposite directions (most common in Tanzania)
- Hip roof: Slopes on all four sides
- Gable roof: Has a triangular shape at the ends
Flat Roof
A flat roof has a sloping angle between 5° and 10°. While it uses less material, it requires proper drainage construction.
A roof plan is a scaled drawing showing a top-down view of a building's roof. It displays:
- The size and dimensions of the roof
- The direction of rainwater drainage
- The position of vents and associated components
Follow these steps to draw a pitched roof plan:
Step 1: Draw the Exterior Outline
Draw the exterior outline of the floor plan of the building. The floor plan details are not required in the roof plan.
Step 2: Draw the Eaves Overhang
Draw the eaves overhang from the exterior outline. In residential buildings, the minimum roof overhang is 600 mm from the outside of the external wall.
Step 3: Establish 45° Lines
Establish a 45° line on each corner of the eaves overhang to produce hip and ridge on the roof.
Step 4: Connect Hips to Form Ridge
Connect all hips by a line to form the ridge of the roof.
Step 5: Show Drainage
Mark the position of the gutter around the rainwater direction and propose the position for downpipes. Show the rainwater movement direction.
Given: A rectangular building with a floor plan measuring 10,000 mm × 8,000 mm
To draw the roof plan:
- Draw the exterior outline: a rectangle 100 mm × 80 mm (using scale 1:100)
- Add 600 mm eaves overhang: offset outward by 6 mm on all sides
- At each corner, draw 45° lines inward to meet at the center
- Connect these lines to form the ridge (for a gable roof) or hips (for a hip roof)
- Add arrows showing rainwater flow toward the gutters and downpipe positions
A complete roof plan must include:
- Dimensions: Numerical values defining the size of roof parts (e.g., roof length, width, overhang, ridge height)
- Labels: Readable text identifying roof elements (ridge, hip, valley, gutter, downpipe)
- Scale: The drawing scale used (e.g., 1:50, 1:100)
- North arrow: To show orientation
- Title block: Project name, date, and drafter information
| Element | Description |
|---|---|
| Roof | Topmost covering protecting against weather |
| Roof plan | 2D top-down view showing roof geometry |
| Pitched roof | Sloping roof >10° angle |
| Flat roof | Sloping roof 5°-10° angle |
| Eaves overhang | Minimum 600 mm in residential buildings |
In Tanzania, when a family plans to construct a house in places like Mwanza, Arusha, or Dodoma, a roof plan is essential for ordering the correct amount of roofing materials like iron sheets or tiles. A builder or mason reads the roof plan to understand the slope direction, ensuring rainwater flows toward gutters and downpipes positioned away from the house foundation, preventing soil erosion and dampness that could damage walls in the rainy season.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select tools appropriate for the task
- Draw paper layout with title block
- Select appropriate scale and plan work
- Draw roof plans
- Perform inking of the drawings
- Perform lettering of the drawings
- Clean drawing tools and store them
Tathmini ya matokeo
Drawn roof plans conform to set standards
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain the methods involved in producing roof plans
Principles: The student should explain the principles of:
- Drawing roof plans
- Inking drawings
- Lettering of the drawings
Theories: The student should explain:
- Dimensioning of roof plans
- Information shown on roof plans Circumstantial Detailed knowledge about:
- Safe handling of working tools
- Safe handling of drawing pens
- Neatness of the drawings
Swali
What is the minimum recommended eaves overhang for a residential building roof plan?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado