Mada za sehemu hiiProducing architectural drawingsMada 6
Drawing Elevations
An elevation is a vertical view of a building that shows how it looks from one side. In architectural drawing, elevations are essential because they reveal the height, arrangement, and appearance of building elements that cannot be seen in floor plans.
In architecture and construction, elevations refer to the various vertical views of a building or drawn faces of a building or structure. They can show either exterior or interior views and are essential for understanding the exterior and interior appearance, design, and how different parts of the structure relate to each other.
Buildings have different sides: front, back, left, and right. One cannot see all these sides at once. Designs of elevations are made by considering aesthetic and functional factors. This makes the building pleasing to view and protects the interior from harsh exterior conditions such as rain, solar radiation, and winds.
Building elevations show arrangements, locations, shapes, and sizes of different building elements along the vertical plane. These views show the vertical finished appearance of a building which can easily be understood. They convey information on opening sizes and shapes, external or internal surface finishes, and the height of a building.
Elevations help architects, designers, and clients visualise the building's appearance and make design decisions. Elevations provide information that cannot be seen in the floor plan, section, or roof plan.
For example, a kitchen fitted with worktops and cabinets can be shown on the floor plan. However, no information can be provided about the height of worktops, components of worktops, overhead cabinets, and drawers located beneath the worktops. This information is only available on an elevation or a section-elevation drawing.
Elevations show design details of houses or apartments, including features like porches, balconies, and rooflines.
This refers to the labelling and identification of the various views of a building's exterior or interior. Elevations commonly used include:
- Front elevation – the view from the main entrance side
- Back or rear elevation – the view from behind the building
- Right side elevation – the view from the right side
- Left side elevation – the view from the left side
- Interior elevations – views of interior spaces
However, other names may be used to refer to elevations such as North, South, East, and West elevations as a result of the orientation of the building. In other cases, elevations can be numbered. The key to elevation is provided on the floor and roof plans for reference.
Drawing a building elevation requires imagination and understanding of orthographic projection. The floor plan of the building provides a baseline for the development of the building elevation. It is recommended to use the same scale used in the drawing of the floor plan for easy projections, comparison, and references. Elevation drawing is often drawn on a separate sheet as may be projected from the floor plan sheet.
The following are the steps to follow:
Step 1: Selection of Scale and Height
From a given floor plan and roof plan, establish or adopt the scale of the elevation. Decide the height of the building or walls with reference to the floor level. Elevation drawings are drawn to scale; each element in that particular drawing will be related proportionally to the actual measurement. Ensure the elevation fits on the sheet.
Step 2: Draw the Building Envelope
Start by drawing the width of the building's envelope by projecting vertical lines from the floor plan. Use the measurements on the floor and roof plan drawings. Decide the base of the elevation and height of the wall.
Step 3: Draw Windows, Doors, and Openings
Project the position of windows, doors, and all openings from the floor plan. Additional information on the dimensions of windows and doors can be obtained from the window and door schedule drawing.
Step 4: Draw the Roof
Represent rooflines, overhangs, and eaves and show the pitch or slope of the roof. The overhang size and angle of a pitch should match the one indicated in the roof plan and section drawings. In case there is an end gable wall or a shed wall, determine the highest point of the wall below your roof by using the slope of the roof, then calculate the height of the topmost point of the roof. Determine the actual thickness of the roof including all framing such as fascia or barge board and draw this onto your elevation drawing.
Step 5: Draw the Plinth Level
Include any stairs or steps to access the ground floor and baluster if any. Darken the lines viewed and remove unnecessary lines by drawing vertical lines from the floor level to the anticipated ground level at each plane corner. Also, show wall texture, roof materials, window infill, and balusters if any.
Step 6: Draw the Natural Ground-Level Line
Draw a horizontal line to form a natural ground level as well as the grid line.
Step 7: Label and Dimension the Elevation
Dimensioning of an elevation is mainly attributed to the vertical height dimensions. The elements which must be dimensioned are:
- Plinth height
- Floor-to-ceiling height
- Overhang width
- Height of the windows from floor finish
- Height of the windows and doors
Labelling of an elevation should be included where additional information is needed. Typical notes include:
- Wall finish material
- Roof covering finish material
- Fascia or barge board material
- Flashing material
Consider drawing the front elevation of a simple rectangular house with the following details from its floor plan:
- Building width: 8,000 mm
- Building depth: 6,000 mm
- Wall height: 3,000 mm
- One entrance door: 900 mm × 2,100 mm
- Two windows: 1,200 mm × 1,200 mm each
- Pitched roof with 30° slope and 600 mm overhang
Solution:
-
Select scale: Use 1:100 (1 cm = 1,000 mm on drawing)
-
Draw building envelope: Draw a rectangle representing the wall outline. Width = 80 mm, height = 30 mm.
-
Draw windows and doors:
- Door: Position at center-left, 9 mm wide × 21 mm high
- Windows: Position symmetrically, 12 mm × 12 mm each
-
Draw the roof: Draw a triangular shape on top representing a 30° pitched roof with 6 mm overhang on each side.
-
Draw ground level: Draw a horizontal line 5 mm below the wall base.
-
Add dimensions: Label plinth height (450 mm), floor-to-ceiling height (2,550 mm), window heights (900 mm from floor), and door height.
-
Label materials: Add notes such as "Walls: Plastered cement render," "Roof: Corrugated iron sheets."
In Tanzania, understanding elevation drawings is crucial for anyone involved in building construction or property development. For instance, when a family in Dar es Salaam hires a fundi (craftsman) to build their house, the elevation drawings help them visualise how the completed building will look, including the roof pitch, window placement, and overall height—ensuring the design meets their expectations and fits well within their plot while complying with local building regulations.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select tools appropriate for the task
- Draw paper layout with title block
- Select appropriate scale and plan work
- Draw building elevations
- Perform inking of the drawings
- Perform lettering of the drawings
- Clean drawing tools and store them
Tathmini ya matokeo
Building elevations drawn conform to set standards
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain the methods involved in producing building elevations
Principles: The student should explain the principles of:
- Drawing building elevations
- Inking drawings
- Lettering of drawings
Theories: The student should explain:
- Information shown on building elevations. Circumstantial Detailed knowledge about:
- Safe handling of working tools
- Safe handling of drawing pens
Swali
What is an elevation in architectural drawing?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado