Mada za sehemu hiiProducing architectural drawingsMada 6
A section is a drawing that shows what a building looks like when cut through by an imaginary vertical plane. Think of it like slicing a loaf of bread — when you cut through, you can see the inside layers that were hidden from the outside. In the same way, a section drawing reveals the interior details of a building that cannot be clearly shown in floor plans or elevation drawings.
Sections are important because they:
- Show the interior details and relationships of different parts of a building from a vertical perspective
- Represent the materials of construction, height, and measurements of different building components
- Show types of structural elements such as trusses, slabs, beams, and columns
- Provide clarification of inner components like wall layers, floor structure, and roof details
A cross-section is an imaginary view of a building as though it were cut along a vertical plane (like slicing through the building with a saw) and then looking into the exposed space. This allows you to see the arrangement of walls, floors, ceilings, windows, doors, stairs, and other internal features.
There are two main types of cross-sections used in architectural draughting:
Transverse Section This is a section cut along the short axis of a structure (perpendicular to the longest side). It shows the building's width and interior arrangement across the shorter direction.
Longitudinal Section This is a section cut along the longest axis of a structure (perpendicular to the shortest side). It shows the building's length and runs the full length of the building. Longitudinal sections are usually longer than transverse sections.
When preparing section drawings, you must indicate:
- Cutting plane line: An imaginary line shown on the floor plan using thin long and short dashed lines, with thickened ends or bends showing change in direction
- Viewing direction: Shown by an arrow on the section line indicating which way you are looking
- Section name: Letters at each end of the cutting plane line (for example, Section X-X or Section A-A)
The section line must have letters at each end indicating the name of the section drawing and an arrow showing the direction that the view takes. It is advised to locate the section line where the complete shape of the room can be seen or where doors or windows are cut.
There are several types of section views used in civil draughting:
Full Section View The building or object is sliced completely in two from end to end. This shows the entire interior of one half of the building.
Offset Section View Similar to a full section, except the cutting plane line is not straight. This is used when important features do not fall in a straight line.
Half-Section View (Section Elevation) Shows one-half of the view in section while the other half appears as an exterior view (elevation). This type is commonly used where a building or element is asymmetrical.
Section linings are thin lines drawn within the cutting plane to indicate the type of material used in construction. Different materials are represented by different hatching patterns:
- Concrete: Dotted or small circles pattern
- Brickwork: Diagonal lines
- Earth/compacted soil: Irregular dots
- Sand/cement screed: Dashed lines
The hatching helps anyone reading the drawing quickly identify what materials are used in each building element.
Follow these four steps to draw a building section:
-
Choose an appropriate location for a section line
- Draw a line on your floor and roof plans that cuts through the plane where you need to show cross-section details
- Indicate the direction of view and name the section (for example, Section X-X)
-
Draw the orthographic projection (section)
- Draw the width of the outer envelope of your building through the cross-section line
- Use measurements from the floor plan and roof plan drawings
- Include: foundation footings, foundation walls, above-ground exterior walls, ground level line, windows, partitioning walls, lintels and beams, doors, and the roof
-
Apply appropriate hatching
- Apply hatch patterns to all cut surfaces from the foundation, floor, walls, windows, doors, and roof
- Use the correct pattern for each material type
-
Label and dimension the drawing
- Label all materials from top to bottom
- Provide the name of the section, levels, and scale
- Draw dimension lines indicating the dimensions of all components including: plinth height, level of windows or doors from floor level, size of beams, roof inclination, and building height
Given a simple rectangular room floor plan with dimensions 6m × 4m, draw a transverse section:
- Draw the section line across the 4m width of the floor plan
- Project vertically to show:
- Foundation footing: 690mm wide
- Foundation wall: 230mm thick
- Ground level to floor level: 450mm
- Wall height: 3.0m
- Roof with 25° pitch
- Apply hatching to all cut surfaces
- Label: foundation concrete, brick wall, floor slab layers, roof covering
- Add dimensions: plinth height (450mm), floor-to-ceiling (3000mm), roof angle (25°)
When building a house in Tanzania, a contractor uses section drawings to understand how many layers of materials are needed for the foundation, walls, and roof. For example, if you are constructing a simple house in Dar es Salaam, the section drawing will show that the foundation needs 100mm of hardcore, 50mm of blinding sand, a damp proof membrane, and 100mm of concrete — helping you budget for materials like 10 bags of cement (approximately TZS 150,000) and 3 tonnes of ballast for the foundation work.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select tools appropriate for the task
- Draw paper layout with title block
- Select appropriate scale and plan work
- Draw building sections.
- Perform inking of the drawings
- Perform lettering of the drawings
- Clean drawing tools and store them
Tathmini ya matokeo
Drawn building sections conform to set standards
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain the methods involved in producing building sections
Principles: The student should explain the principles of:
- Drawing building sections
- Inking drawings
- Lettering of the drawings
Theories: The student should explain:
- Dimensioning of building sections
- Information shown on building sections Circumstantial Detailed knowledge about:
- Safe handling of working tools
- Safe handling of drawing pens
- Protection from dust during tracing
- Neatness of the drawings
Swali
What is a section drawing in architectural draughting?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado