Mada za sehemu hiiMaking up right furnitureMada 4
- Making stool/table
- Making bed
- Making shelf
- Making chair
A stool is a simple piece of furniture consisting of a flat top supported by legs, without a back or armrests. In this topic, you will learn how to interpret working drawings, prepare timber members, make joints (mortise and tenon), and assemble a stool following correct procedures and safety measures.
A stool is one of the earliest forms of seat furniture. It bears many similarities to a chair but is distinguished by lacking arms and a back. A stool typically has a single seat for one person, on a base of either three or four legs. Some modern stools may have one, two, or five legs.
Stool rails are horizontal members between the legs. They are fixed on the upper part of the legs and are known as top rails, while those fixed on the lower part are called bottom rails. These rails provide strength and stability to the stool frame.
Stool top is the part of the stool used for seating. It is fixed on top of the stool frame and is the surface where a person sits.
Follow these steps in order to produce a quality and neat stool:
- Interpret working drawing – Read and understand the drawing showing dimensions and design.
- Prepare cutting list – List all pieces needed with their sizes.
- Select materials – Choose timber free from defects like knots or cracks.
- Select tools – Gather all required tools for the job.
- Prepare stool members – Cut and plane timber to required sizes (refer to timber preparation procedures).
- Set out legs – Mark positions for joints on the legs according to the drawing.
- Set out rails – Mark positions for joints on the rails.
- Chop mortise – Cut square holes (mortises) in the legs.
- Cut tenon – Cut projecting tongues (tenons) on the ends of rails to fit into mortises.
- Trial assemble – Fit joints together without glue to check accuracy.
- Cut stool top – Cut the seat top to the required size and shape.
- Final assembling – Glue and join all parts together.
- General finishing – Sand, apply sanding sealer, and apply final finish (varnish or paint).
The most common joint used in stool making is the mortise and tenon joint. This joint consists of:
- Mortise – A square or rectangular hole cut into a leg
- Tenon – A projection cut on the end of a rail that fits into the mortise
The tenon must be slightly smaller than the mortise to allow for glue and easy fitting. When properly made, this joint provides strong and durable connection between the legs and rails.
| Step | Action |
|---|---|
| 1 | Interpret the working drawing |
| 2 | Select materials as per drawing |
| 3 | Select tools and equipment |
| 4 | Prepare stool members (cut and plane timber) |
| 5 | Set out legs as per drawing |
| 6 | Set out rails as per drawing |
| 7 | Chop mortise as per set out |
| 8 | Cut tenon as per set out |
| 9 | Trial fit to check joint tightness and straightness |
| 10 | Cut stool top to size |
| 11 | Assemble stool frame with glue |
| 12 | Clean the stool frame |
| 13 | Fix the top to the frame |
| 14 | Perform sanding (start with coarse, then fine sandpaper) |
| 15 | Apply sanding sealer |
| 16 | Apply finishing (varnish, clear, or paint) |
| 17 | Clean workplace and return tools to store |
Always observe the following safety measures when making a stool:
- Wear overall protective clothing
- Wear safety goggles to protect eyes
- Wear safety boots to protect feet
- Use the right tools for each job
- Keep the workplace clean and tidy
- Return tools to storage after use
In Tanzania, a carpenter in a local workshop or someone making furniture at home would use these skills to create a stool for their household. For example, a carpenter in Arusha or Dar es Salaam could make a sturdy stool to sell at the market for around TZS 30,000 to 50,000, providing affordable seating for families. These skills also enable small business owners to repair or build simple furniture for shops, schools, and homes, contributing to the local carpentry trade.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Draw upright furniture
- Interpret the drawings
- Calculate materials required
- Select tools equipment and materials
- Prepare members
- Set out joints
- Make joints
- Assemble the furniture
- Apply finishes
- Clean the work area
- Store the furniture and tools to their place
Tathmini ya matokeo
Constructed stool/table conform to drawing and technical specifications
Tathmini ya maarifa
Detailed knowledge of:
Method used: The student should be able to explain methods related to make stool/table
Principles: The student should explain principles related to make stool/table
Theories: The students should explain theories related to make stool/table
Circumstantial knowledge: The students should explain detailed knowledge
Swali
What is the primary characteristic that distinguishes a stool from a chair?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado