Mada za sehemu hiiMaking up right furnitureMada 4
Making a Bed
A bed is a piece of furniture designed for sleeping and resting. It consists of several wooden members that are joined together to form a sturdy frame. In this topic, you will learn the parts of a bed, standard sizes, and the step-by-step procedure for constructing a bed frame.
A bed is furniture upon which a person sleeps, rests, or stays when not well. The mattress is placed on top and covered with bedclothes. Beds are essential household furniture found in homes, hotels, hospitals, and dormitories.
Understanding the different parts of a bed is important before starting construction:
Headboard
The headboard is the large piece at the head of the bed where the sleeper's head rests. It includes:
- Headboard Slat: Vertical grid or slats that form the base for the headboard
- Headboard Top Rail: Horizontal piece on top of the headboard
- Headboard Cross Rail: Horizontal piece below the headboard slats
Footboard
The footboard is the decorative vertical piece at the foot end of the bed:
- Footboard Top Rail: Horizontal piece at the top of the footboard
- Footboard Slat: Part that goes between the top rail and bottom front rail
- Bottom Front Rail: Horizontal piece at the bottom of the footboard
Side Rails and Support
- Bottom Side Rail: Lower part of the bed frame running from headboard to footboard
- Bedside Rail: Also called safety rail; sits at the top of the bed for support
- Cleat: Base that supports the slats
- Slats: Horizontal boards that support the mattress
Legs
Wooden or metal pieces at the bottom of the bed that lift the frame off the ground and provide support.
When making a bed, it is important to know the standard dimensions:
| Types of Bed | Length | Breadth |
|---|---|---|
| King Size | 72 to 78 inches (1.83m to 1.98m) | 72 inches (1.8 m) |
| Queen Size | 72 to 75 inches (1.83m to 1.91m) | 60 or 66 inches (1.52m or 1.68 m) |
| Double Bed | 72 to 78 inches (1.83m to 1.98m) | 48 inches (1.22 m) |
| Single Bed | 72 to 78 inches (1.83m to 1.98m) | 30, 36 or 42 inches (76.2 cm, 91.4 cm, 1.07 m) |
For school practical work, the single bed is the most common size because it uses less material and is easier to construct.
Follow these steps in order to produce a quality bed frame:
- Interpret the working drawing – Study the provided drawing to understand the design and dimensions
- Prepare a cutting list – List all timber pieces needed with their sizes
- Select materials – Choose timber free from defects like knots and cracks
- Select tools and equipment – Gather saws, chisels, planes, measuring tools, and clamping devices
- Prepare bed members – Saw and plane timber to required sizes (refer to timber preparation procedures)
- Set out legs – Mark positions for joints on the leg pieces according to the drawing
- Set out rails – Mark positions on side rails, headboard, and footboard
- Chop mortise – Cut rectangular holes in the legs for tenons to fit into
- Cut tenon – Shape the ends of rails to fit into the mortises
- Trial assemble – Fit all joints together without glue to check accuracy
- Disassemble and prepare for finishing – If trial fit is correct, take apart and prepare surfaces
- Final assembling – Glue and join all members together firmly
- Fix slats and cleats – Install the supporting slats for the mattress
- Perform sanding – Start with coarse sandpaper and progress to fine paper
- Apply sanding sealer – Let dry, then smooth with fine sandpaper
- Apply finishing – Use varnish, clear coat, or paint as required
- Clean workplace and return tools – Organize the workshop and store tools properly
Worked Example: Preparing a Single Bed Frame
For a single bed frame with dimensions 1900mm × 910mm:
- Headboard: Two legs at 600mm long, one top rail at 910mm, one cross rail at 600mm
- Footboard: Two legs at 300mm long, one top rail at 910mm, one bottom rail at 910mm
- Side rails: Two pieces at 1900mm long
- Slats: Five pieces at approximately 800mm long
Total timber required: Approximately 8 to 10 pieces of 25mm × 100mm timber.
Always observe safety rules in the workshop:
- Wear overalls to protect your clothing
- Wear safety goggles when cutting or chiselling
- Wear safety boots to protect your feet
- Use the right tool for each job
- Keep the workplace clean and tidy
- Return tools to their proper storage after use
- Always cut on the waste side of marked lines
In Tanzania, bed frames are commonly made by local carpenters in towns like Arusha, Mwanza, and Dodoma. If you wanted to start a small furniture workshop, knowing how to construct beds would allow you to produce single beds for student hostels (common near universities like UDOM or MUHAS), guest houses, or family homes. A basic single bed frame might sell for TZS 150,000 to TZS 250,000 depending on the quality of timber and finishing used.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Draw upright furniture
- Interpret the drawings
- Calculate materials required
- Select tools equipment and materials
- Prepare members
- Set out joints
- Make joints
- Assemble bed
- Apply finishes
- Clean the work area
- Store the furniture and tools to their place
Tathmini ya matokeo
The constructed bed conforms to drawing and technical specifications
Tathmini ya maarifa
Detailed knowledge of:
Method used: The student should be able to explain methods related to make bed
Principles: The student should explain principles related to make bed
Theories: The students should explain theories related to make bed
Circumstantial knowledge: The students should explain detailed knowledge related to make bed
Swali
Which of the following is the standard breadth of a single bed according to the textbook?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado