Mada za sehemu hiiDehairing raw hides and skinMada 5
- Preparing lime solution
- Dipping hides and skins
- Performing stage beams
- Scraping hair out
- Removing lime
Liming is a chemical treatment in leather tanning where hides and skins are soaked in a lime (calcium hydroxide) solution. The lime solution helps to:
- Loosen the hair and epidermis from the hide
- Swell the hide fibers to make them easier to work with
- Remove unwanted tissues and fats
This step prepares the hide for the dehairing process that follows.
Lime solution is made from quicklime (calcium oxide, CaO) mixed with water. When quicklime reacts with water, it forms slaked lime (calcium hydroxide, Ca(OH)₂), which dissolves in water to make the lime solution used in tanning.
Materials and Equipment Needed
- Quicklime (calcium oxide)
- Clean water
- Plastic containers or buckets
- Stirring stick or wooden pole
- Rubber gloves
- Safety boots
- Overall or overcoat
Steps to Prepare Lime Solution
-
Put on protective clothing — Wear rubber gloves, safety boots, and an overall to protect your skin from the caustic lime.
-
Measure the quicklime — For a standard working solution, measure about 100 grams of quicklime per liter of water. Adjust the amount depending on how strong a solution you need.
-
Add water to the container — Fill a clean plastic container with the measured amount of water. Use cold or lukewarm water.
-
Add quicklime gradually — Slowly sprinkle the quicklime into the water while stirring continuously. Never add water to quicklime; always add lime to water to avoid splashing.
-
Stir thoroughly — Mix the solution well until the quicklime is fully dissolved. The mixture will become cloudy as the lime reacts with water.
-
Let the solution settle — Allow the mixture to stand for a few hours. The undissolved particles will settle to the bottom, leaving a clearer solution on top.
-
Strain the solution — Pour the settled solution through a clean cloth or fine strainer to remove particles. The clear liquid is your lime solution ready for use.
-
Store safely — Keep the prepared solution in a clearly labeled container, away from children and animals.
Safety Precautions
- Always add lime to water, not water to lime
- Wear protective gear at all times
- Work in a well-ventilated area or under a working shade
- Wash hands thoroughly after handling lime
- In case of skin contact, rinse with plenty of clean water immediately
A tanner needs to prepare 20 liters of lime solution for treating hides. If the recipe calls for 100 grams of quicklime per liter of water, how much quicklime is needed?
Calculation: 100 grams/liter×20 liters=2000 grams
Answer: The tanner needs 2 kilograms (2 kg) of quicklime to prepare 20 liters of lime solution.
Preparing the correct lime solution concentration is important. A solution that is too weak will not effectively loosen the hair, while a solution that is too strong can damage the hide fibers. Following the correct steps ensures good quality leather production.
In Tanzania, small-scale tanners in areas like Morogoro and Shinyanga use lime solution to process hides and skins into leather. For example, a local tannery preparing 50 liters of lime solution for a batch of cow hides would need 5 kg of quicklime (100 g × 50 L). This prepared leather can then be sold to shoemakers in local markets, supporting small businesses and generating income for families.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select material
- Select tools and equipment
- Set tannery beams
- Inspect for quality • Estimate amount of water
- Prepare lime solution
- Steer and mix
- Observe safety
- Clean tools and equipment
- Store tools and equipment
Tathmini ya matokeo
The lime solution prepared is required according to the required specifications Kn roduct/Services ssessment
Tathmini ya maarifa
Knowledge Evidence: Detailed knowledge of:
Method used: The student should explain how to:
- Prepare lime solution
Principles: The student should explain the principles related to:
- Making lime solution
- Handling lime solution
- Handling various lime yard materials, tools and equipment
Theories: The student should explain:
- Importance of precise and detailed work while making lime solution
Circumstantial knowledge: Detailed knowledge of:
- Safety precautions pertaining to handling lime solution
- First Aid
- Waste disposal
Swali
What is the chemical name of quicklime used to prepare lime solution?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado