Mada za sehemu hiiDehairing raw hides and skinMada 5
- Preparing lime solution
- Dipping hides and skins
- Performing stage beams
- Scraping hair out
- Removing lime
Stage Beams in Leather Tanning
In rural leather tanning, after the liming process (which swells the hides and loosens the hair), the next critical step is removing the lime and unwanted tissues using a beam. This is known as performing stage beams or beam work. The beam is a curved wooden or concrete structure used to scrape and clean hides manually. This stage prepares the hides for the actual tanning process by removing the loosened hair, epidermis, and excess lime.
A stage beam (also called a tanning beam) is a sturdy, curved working surface specifically designed for scraping and fleshing hides during leather processing. It is typically made from hardwood or concrete and is mounted at a comfortable working height. The curved shape allows the hide to be stretched and held taut while scraping, ensuring uniform removal of unwanted materials.
The main purposes of performing beam work are:
- Removing loosened hair and epidermis: After liming, the hair and outer skin layer become loose and can be scraped off easily.
- Removing excess lime: Lime used in the liming process must be removed to prevent damage to the hide and to prepare it for the pickling or tanning process.
- Fleshing: Removing residual flesh, fat, and connective tissues from the inner side of the hide.
- Thinning the hide: Achieving uniform thickness across the hide for better quality leather.
Before starting beam work, gather the following tools:
- Tannery beam (the main working surface)
- Curved panga or fleshing knife
- Kitchen knife
- Hammer (for trimming)
- Hand brooms
- Buckets
- Rubber gloves
- Safety boots
- Overall or over coat
- Water for rinsing
- Gunny bags (for drying)
Follow these steps carefully:
Step 1: Prepare the Working Area
Ensure the beam is clean and positioned at a comfortable height. Put on your protective clothing (overall, boots, and gloves). Have a bucket of clean water and a gunny bag nearby.
Step 2: Inspect the Limed Hide
Before placing the hide on the beam, check that the liming process has been effective. The hair should pull out easily, and the hide should feel soft and swollen.
Step 3: Place the Hide on the Beam
Spread the limed hide on the beam with the flesh side facing up. The curved surface allows the hide to be stretched and held in place by the operator's body weight.
Step 4: Scrape Off Hair and Epidermis
Using the curved panga or fleshing knife, work from the centre of the hide toward the edges. Hold the knife at a slight angle and use firm, controlled strokes. The hair and loosened epidermis will come off as you scrape. Wipe the blade regularly to keep it clean.
Step 5: Flesh the Hide
After removing the hair, turn the hide over (or work on the flesh side if not already done). Use the knife to remove any remaining flesh, fat, and connective tissues. This step is called fleshing.
step 6: Rinse the Hide
Once scraping and fleshing are complete, rinse the hide thoroughly with clean water to remove all lime residues. Use buckets to pour water over the hide or dip it in a container.
step 7: Final Trimming and Inspection
Trim any uneven edges with the knife and hammer. Inspect the hide to ensure it is clean and free from hair, lime, and excess flesh.
- Always wear protective clothing, including boots and gloves.
- Keep the knife sharp but handle it carefully to avoid cuts.
- Work in a well-ventilated area or shade to avoid inhaling any lime dust.
- Wash hands thoroughly after handling limed hides, as lime can irritate the skin.
A small tannery in Arusha processes 10 goat skins in one session. After liming for 24 hours, each skin is placed on the beam for scraping. Using the curved panga, a skilled worker removes the hair and flesh from each skin in approximately 15 minutes. After scraping, all skins are rinsed in clean water to remove lime. The cleaned skins are then ready for the next stage of tanning.
- Using a dull knife: This makes scraping difficult and can damage the hide.
- Applying too much pressure: This may tear the thin parts of the hide.
- Incomplete rinsing: Residual lime can cause the leather to become brittle.
- Working on an unstable beam: This is dangerous and affects the quality of work.
In Tanzania, many small-scale tanners in regions like Arusha, Dodoma, and Morogoro use traditional beam methods to process hides from local livestock. For example, a village tanner near Arusha may earn income by beam-processing goat skins collected from nearby farmers, then selling the cleaned hides to larger tanneries. This skill provides employment and supports the local leather goods industry, including the production of belts, sandals, and bags sold at local markets such as the Mwenge Craft Market in Dar es Salaam.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select material
- Select tools and equipment
- Set tannery beams
- Grade raw hides and skins
- Determine liming time
- Wash hides and skins
- Inspect for quality
- Estimate the amount of water
- Steer and mix
- Take out hides and skins
- Use tannery beams
- Wash the pelt
- Check for liming completion
- Clean the pelt
- Observe safety
- Clean tools and equipment
- Store pelt
- Store delimed hides and skins
- Store tools and equipment
Tathmini ya matokeo
Raw hides and skins are soaked in lime solution as per required time and temperature.
Tathmini ya maarifa
Detailed knowledge of:
Method used: The student should explain how to:
- Use tannery beams
- Make tests for deliming process
- Prepare pelt for next stages
Principles: The student should explain the principles related to:
- Performing dehairing
- Performing stage beams of raw hides
- Use of tannery beams
Theories: The student should explain:
- Types of liming
- Importance of precise and detailed work while performing stage beams of raw hides and skins
Circumstantial knowledge:
Detailed knowledge about:
- Safety precautions pertaining to performing stage beams
- Safe handling of workshop facilities
Swali
What is the primary material used to make a stage beam in rural leather tanning?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado