Mada za sehemu hiiDesigning and making domestic refrigeratorMada 6
Making Clutter in Domestic Refrigerator
When we talk about "making clutter" in refrigeration, we refer to assembling and arranging the electrical wiring, control circuits, and connections that allow a refrigerator to operate properly. The clutter includes the power supply wiring, thermostat connections, compressor motor wiring, fan motor wiring, and all electrical components that work together to control cooling. In this practical activity, you will learn how to properly arrange and connect these electrical components following safe procedures.
Clutter in a refrigerator refers to the complete electrical wiring system and connections that distribute power to various components such as the compressor, fan motor, thermostat, and lighting. The purpose of the clutter is to:
- Supply electrical power from the mains to each component safely
- Enable automatic temperature control through the thermostat
- Protect the system with proper grounding and fusing
- Allow easy maintenance and troubleshooting
The main components that make up the clutter in a domestic refrigerator include:
Power Supply Cord and Plug
The cord connects the refrigerator to the main electrical supply. It contains live, neutral, and earth wires.
Thermostat
This device controls the compressor by sensing the internal temperature and switching the compressor on or off to maintain the desired cooling level.
Compressor Motor
The compressor is the heart of the refrigeration system. It requires electrical power to compress the refrigerant. The clutter connects the thermostat to the compressor motor.
Fan Motor
The fan circulates cold air throughout the refrigerator compartments. It is connected to receive power when the compressor runs.
Overload Protector
This safety device protects the compressor motor from overheating or drawing excessive current.
Start Relay
The start relay helps the compressor motor to start by providing the necessary initial voltage boost.
Light Switch and Interior Light
The light turns on when the refrigerator door opens, controlled by a simple door-activated switch.
Follow these steps when assembling the clutter in a domestic refrigerator:
Step 1: Planning and Drawing the Circuit
- Study the refrigerator's electrical diagram
- Identify all components and their connections
- Draw a simple wiring layout showing how components connect
Step 2: Preparing the Tools and Materials
Gather all necessary tools: multimeter, clamp-on meter, screwdriver set, wire strippers, electrical tape, connectors, and heavy-duty clamps. Ensure you wear safety goggles and gloves.
Step 3: Installing the Power Cord
- Connect the power cord to the refrigerator's electrical housing
- Ensure proper connection of live (L), neutral (N), and earth (E) wires
- Secure the cord using clamps to prevent strain on connections
Step 4: Connecting the Thermostat
- Mount the thermostat in the appropriate position inside the refrigerator
- Connect the thermostat in series with the compressor circuit
- The thermostat acts as the control switch that breaks or makes the circuit
Step 5: Wiring the Compressor Circuit
- Connect the start relay and overload protector to the compressor motor
- Wire the compressor to receive power through the thermostat
- Ensure all connections are tight and secure
Step 6: Connecting the Fan Motor
- Wire the fan motor to operate together with the compressor
- Use appropriate gauge wire for the current rating
- Secure wiring away from moving parts
Step 7: Installing the Lighting Circuit
- Connect the interior light and door switch
- Test that the light operates when the door opens
Step 8: Testing and Verification
- Use the multimeter to check for continuity in all circuits
- Verify proper grounding of all metal parts
- Check for any short circuits before connecting to power
When making clutter in a refrigerator, always observe these safety measures:
- Disconnect the power supply before starting any electrical work
- Use insulated tools when working with live circuits
- Wear safety goggles to protect eyes from flying debris
- Wear gloves when handling sharp edges or electrical components
- Ensure proper grounding to prevent electric shock
- Keep the work area clean and free of flammable materials
- Never work on the electrical system while the refrigerator is humid or wet
A typical domestic refrigerator follows this basic wiring pattern:
Mains Supply → Power Cord → Thermostat → Overload Protector → Compressor Motor
↓
Start Relay
↓
Fan Motor
The thermostat controls the entire system. When the interior temperature rises above the set point, the thermostat closes the circuit and allows current to flow to the compressor and fan. When the temperature drops to the desired level, the thermostat opens the circuit and stops the cooling cycle.
Suppose you need to verify that the thermostat is correctly connected in the circuit:
- Set your multimeter to continuity or resistance (Ω) mode
- Disconnect the refrigerator from the power supply
- Locate the thermostat terminals
- Place one probe on the incoming supply wire and the other on the wire going to the compressor
- If the thermostat is closed (calling for cooling), the multimeter should show near zero ohms (continuity)
- If the thermostat is open (refrigerator is cold enough), the multimeter should show infinite resistance
This test confirms that the thermostat is properly connected in series with the compressor circuit.
In Tanzania, refrigeration technicians use these skills when repairing or maintaining refrigerators in homes, shops, and small businesses. For example, a technician in Dar es Salaam might need to rewire the clutter in a refrigerator at a local duka la vifaa to ensure the compressor and fan work correctly, preventing food spoilage. Understanding proper electrical connections also helps technicians diagnose problems quickly — a refrigerator not cooling might simply have a loose wire in the clutter that needs tightening, saving the customer from expensive part replacements.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
- Select materials, tools and equipment
- Check the lack of storage
- Observe overpurchasing
- Check overcrowding
- Clean workplace tools and equipment
- Store tools and equipment
Tathmini ya matokeo
Designed refrigerator as per technical Specifications and aesthetic appearance
Tathmini ya maarifa
Knowledge Evidence:
Detailed knowledge of:
Method used: The student should explain how to: Make and assemble panels for minimum
- Pipe the different types refrigeration circuits
- Determine charge
- Apply safety precautions
- Detect refrigerant leakage
Principles: The student should explain the principles of:
- Pressure and Temperature controls
- Refrigeration cycle
- Designing a refrigerator
- Heat transfer
Theories: The student should explain:
- Heat load calculations
- System components capacity
- P-h chart/diagrams
- Material science
- Refrigeration cycles
Circumstantial knowledge:
Detailed knowledge about:
- Safe handling of working tools and equipment
- Aesthetical appearance
- Environmental impacts
Swali
What does the term "clutter" refer to in a domestic refrigerator?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado